ACT 1994 Subaru Impreza Alignment Tool

ACT 1994 Subaru Impreza Alignment Tool | AT90

This product is a plastic clutch alignment tool designed to correctly center the clutch disc relative to the pilot bearing during clutch installation across a wide range of Subaru, Scion, Toyota, BMW, Ford, Lexus, and Saab applications. Using a clutch alignment tool is not optional: without one, the clutch disc will not be centered when you attempt to slide the transmission input shaft into engagement, making it impossible to complete the.

Use ACT manufacturer part number AT90 to confirm the exact drivetrain component and application.

Key Features

• Required for proper clutch disc alignment during pressure plate torquing.
• Hold the disc steady while positioning the pressure plate over the disc and flywheel dowel pins.
• Hand-thread the pressure plate bolts to secure the assembly without moving the disc.
• ACT 6224218-1 6 Pad Sprung Race Disc for FR-S / BRZ / 86.
• ACT RB004 Release Bearing for FR-S / BRZ / 86.
• Position the disc against the flywheel and insert the tip of the alignment tool into the pilot bearing to center the assembly.

Fitment

Vehicle fitment is a starting point. Confirm every drivetrain specification and the exact ACT part number before installation.

Confirm AT90 against the complete ACT application before ordering.

Specifications

Manufacturer Part Number: AT90

Whats Included

The exact ACT tool and quantity identified by the product title and MPN. Bearings, alignment tools, flywheel bolts, pressure-plate bolts, hydraulic parts, and related hardware are included only when specifically stated.

About ACT

ACT develops application-specific clutch kits, friction discs, pressure plates, flywheels, bearings, and supporting drivetrain components for street and motorsport use. Black Ops Auto Works organizes every ACT listing by exact MPN and verified vehicle application.

The AT90 should be selected as part of a complete matched ACT drivetrain system.

Related Parts

• ACT 2007 Infiniti G35 Alignment Tool
• ACT 2003 Mitsubishi Lancer Alignment Tool
• Shop the complete ACT clutch and drivetrain collection

Frequently Asked Questions

What is the AT90?

It is the ACT clutch installation tool described in this listing for the stated application and use.

How do I confirm fitment?

Match the complete year, make, model, engine, transmission and every qualifier shown in the title and fitment section.

Is this intended for street use?

Use suitability depends on the specific disc, pressure plate, flywheel and clutch configuration shown in the listing.

Can I mix clutch components from different kits?

Do not assume components are interchangeable. Verify spline, diameter, step height, release system and the complete matched ACT assembly.

Does installation require break-in?

Follow the current ACT instructions for the exact clutch and disc type. Street friction systems commonly require a controlled break-in period; race products can differ.

Should the flywheel be inspected or resurfaced?

Yes. Inspect the mating surface and use only a compatible flywheel prepared to ACT specifications. Replace damaged or out-of-spec components.

Is professional installation recommended?

Yes. Clutch and flywheel work requires correct transmission removal, fastener torque, alignment, release-system setup and safety procedures.

Can Black Ops Auto Works help verify the application?

Yes. Provide the vehicle, engine, transmission, existing flywheel, power level and intended street or competition use before ordering.

Installation Instructions

1. Confirm ACT part and the complete engine, transmission, flywheel, spline, and release-system application before disassembly.
2. Inspect every component and compare the new part with the removed assembly before modifying or installing anything.
3. Inspect the flywheel or friction surface, pilot support, release bearing, fork, pivot, hydraulic system, seals, and mounting hardware.
4. Clean friction surfaces correctly and keep oil, grease, and fingerprints away from the clutch disc and mating faces.
5. Use the vehicle service procedure and current ACT instructions for alignment, fasteners, torque sequence, release travel, and clearances.
6. Verify smooth release, correct free play, clean gear engagement, and leak-free operation before road use.
7. Complete the manufacturer-specified break-in procedure before launches, dyno pulls, racing, towing, or full-torque operation.