AEM 2017 Honda Pilot V6-3.5L F/I Gunmetal Gray Cold Air Intake

Product Overview

AEM 2017 Honda Pilot V6-3.5L F/I Gunmetal Gray Cold Air Intake from AEM Induction is identified by manufacturer part number 21-795C. This AEM intake system is engineered for 2019-2021 Honda Passport and the other applications listed below, replacing restrictive factory intake components with application-specific airflow routing and serviceable filtration. The gunmetal gray aluminum intake tube is configured for the factory interfaces used by this application. AEM reports an estimated gain of 13 HP @ 5900 RPM for its documented test configuration. Confirm the complete vehicle, engine, trim, and emissions notes in the fitment section before ordering.

Key Features

• Designed as a vehicle-specific intake system; confirm engine, trim, emissions notes, tube configuration, filter style, and every included component.
• New AEM Induction component supplied in the configuration shown and described on this page.
• Exact application, dimensions, and included components should be verified before installation.

Fitment

Confirm AEM Induction 21-795C against the complete vehicle, engine, trim, and every application note before ordering.

• 2017-2020 Honda Ridgeline Sport
• 2019-2021 Honda Passport Elite
• 2019-2021 Honda Passport EX-L
• 2019-2021 Honda Passport Sport
• 2019-2021 Honda Passport Touring
• 2020 Honda Pilot Black Edition
• 2016-2021 Honda Pilot Elite
• 2016-2021 Honda Pilot EX
• 2016-2021 Honda Pilot EX-L
• 2021 Honda Pilot Special Edition
• 2016-2021 Honda Pilot Touring
• 2017-2020 Honda Ridgeline Black Edition
• 2017-2019 Honda Ridgeline RT
• 2017-2020 Honda Ridgeline RTL

Use the store vehicle selector and current manufacturer application data for final confirmation.

Specifications

What’s Included

The exact cold air intakes product identified by AEM Induction 21-795C. Additional filters, tubes, couplers, clamps, heat shields, sensors, hardware, or service supplies are included only when specifically shown or stated.

About AEM Induction

AEM Induction develops vehicle-specific and universal intake, filtration, and supporting components for street and performance applications. Black Ops Auto Works organizes each listing by exact part number and available fitment data to support accurate product selection.

Related Parts

• AEM 12 Hyundai Veloster 1.6L Gunmetal Gray Cold Air Intake
• AEM 11-13 Mini Cooper 1.6L Black Cold Air Intake System
• Shop the complete AEM Induction collection

Frequently Asked Questions

What is the 21-795C?

It is the AEM Induction cold air intakes product described on this page in the listed configuration.

How do I confirm fitment?

Match the complete vehicle, engine, trim, intake layout, dimensions, sensors, and every application note before ordering.

Can I select this product by appearance alone?

No. Similar-looking intake and filter components can use different dimensions, connections, sensor provisions, mounting points, or applications.

What is included?

Only the components specifically identified on this product page are included; related filters, tubes, couplers, clamps, hardware, or service supplies may be separate.

Does an intake require tuning?

Tuning requirements vary by vehicle and intake configuration. Review the product notes and consult a qualified tuner when airflow or sensor behavior changes.

How should I maintain the filter?

Follow the filter-specific manufacturer instructions. Cleaning and treatment procedures vary by filter media and should not be assumed.

Is this product new?

Yes. The item condition is new unless this page explicitly states otherwise.

What should I verify before checkout?

Confirm the application, dimensions, included items, filter type, sensor provisions, emissions notes, and installation requirements.

Installation Instructions

1. Confirm AEM Induction 21-795C and the complete application before disassembly.
2. Inspect the component and compare every tube, filter, coupler, clamp, sensor provision, mounting point, and included item before modifying the vehicle.
3. Follow current AEM Induction instructions and the vehicle service procedure for removal, installation, fasteners, sensors, hoses, and wiring.
4. Keep intake components sealed and routed away from heat, sharp edges, moving parts, and direct water exposure where applicable.
5. Check all connections, start the vehicle, inspect for leaks or warning lights, and verify safe operation before driving.

California Proposition 65 Warning

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.