aFe 05-13 Chevrolet Corvette (C6) CONTROL Electronic Shock Delete Module & Ride Height Simulators

This aFe electronic performance component is the 05-13 Chevrolet Corvette (C6) CONTROL Electronic Shock Delete Module & Ride Height Simulators for 2009-2015 Cadillac CTS. Confirm the exact engine and transmission application, connector and sensor compatibility, supported functions, calibration requirements, and emissions status before installation.

Key Features

• When paired with the aFe CONTROL Ride Height Simulator Modules, you can confidently run lowering or lift kits without disturbing the suspension control system.
• Our aFe CONTROL Electronic Shock Delete Modules and Ride Height Simulators are both required when replacing your MagneRide electronic shock absorbers.
• A body control module check engine light will limit vehicle speeds to 80mph if not bypassed.
• Not using these two products together will set off the suspension control error light.
• aFe CONTROL Electronic Shock Delete Modules are a simple plug and play module that eliminate the suspension control check engine light allowing installation of aftermarket shocks or coilovers on vehicles previously equipped with GM MagneRide electronic shock absorbers.

Fitment

Specifications

What’s Included

One new aFe suspension controller in the exact configuration and quantity identified by this listing. Hardware, clamps, couplers, gaskets, sensors, wiring, fluids, calibration, and accessories are included only when expressly stated.

About aFe Power

aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.

Important Disclosures

• California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• aFe Suspension Logic Electronic Shock Modules w/ Large Connector 97-13 Chevrolet Corvette (C5/C6)
• aFe Suspension Logic Electronic Shock Modules w/ Small Connector 14-19 Chevrolet Corvette (C7)
• Shop the complete aFe Power collection

Frequently Asked Questions

Is the 05-13 Chevrolet Corvette (C6) CONTROL Electronic Shock Delete Module & Ride Height Simulators compatible with my existing tune (aFe 436-401005-B)?
Compatibility depends on the exact vehicle, software, module, sensors, fuel, and other modifications. Confirm the complete calibration strategy before stacking devices.

Is professional calibration required?
Some modules are preconfigured while others require setup or tuning. Follow the current aFe instructions for the exact part and vehicle.

Will this affect emissions readiness or warranty coverage?
Effects vary by product, jurisdiction, vehicle condition, and manufacturer policy. Confirm current emissions classification and understand warranty implications before installation.

What should be checked before powering the module?
Verify connectors, pin condition, grounds, harness routing, battery voltage, sensor connections, and the correct map or vehicle selection.

Installation Instructions

1. Confirm aFe part number 436-401005-B, the complete vehicle or specification-based application, and all required supporting components.
2. Disconnect power as directed and inspect connectors, harness routing, grounds, sensors, and the current vehicle calibration.
3. Install the module and harness without forcing pins or routing wiring near heat, sharp edges, or moving parts; select only the documented vehicle settings.
4. Clear installation-related faults, verify normal startup and data, and test progressively while monitoring for warnings or abnormal operation.