This Air Lift replacement air spring is the Replacement Air Spring – Bellows Type for 1978-1980 Chevrolet C10. Match the original kit or spring number, mounting pattern, bellows dimensions, air-port location, operating range, position, and surrounding bracket condition before replacing an individual spring.

Key Features

• This sleeve has an inflated proper ride height of 7.5 to 9.5 inches and a maximum diameter of 4.6 inches.
• This Air Lift replacement sleeve is an exact replacement for your original Air Lift air spring.
• It is made with sturdy rubber construction and synthetic fabric reinforcement.
• Genuine high-strength, rust-proof Zytel endcaps and an inverted crimp design help the air spring hold shape for a long life.

Fitment

Specifications

What’s Included

One new Air Lift air spring in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Replacement Air Spring – Sleeve Type
• Air Lift Replacement 7500 XL Air Spring for 14-18 Ram 2500 (for 57589)
• Shop the complete Air Lift collection

Frequently Asked Questions

How do I confirm Air Lift 50201, the Replacement Air Spring – Bellows Type, is the correct replacement spring?
Match the original Air Lift kit or spring number, mounting pattern, bellows dimensions, air port, side or position, and the current application listing.

Should both air springs be replaced together?
Inspect both sides, brackets, airlines, and fittings. Replace any worn or leaking component; whether both springs require replacement depends on their condition and service history.

What commonly causes a replacement air spring to fail early?
Abrasion, misaligned or damaged brackets, overextension, heat, debris, incorrect pressure, leaks, and loose hardware can shorten service life. Correct the cause before installing the new spring.

How should the system be checked for leaks?
Inflate within the specified range and apply a manufacturer-approved leak-detection solution to fittings, lines, ports, and bellows. Repair leaks before loading or driving the vehicle.

Installation Instructions

1. Confirm Air Lift part number 50201, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift replacement air spring is the Replacement Air Spring – Bellows Type for 2015-2017 Ford Transit-150. Match the original kit or spring number, mounting pattern, bellows dimensions, air-port location, operating range, position, and surrounding bracket condition before replacing an individual spring.

Key Features

• This bellows has an inflated proper ride height of 5.0 to 7.0 inches and a maximum diameter of 7.0 inches.
• The replacement bellows features genuine high-strength, rust-proof Zytel endcaps and is reinforced with a steel girdle ring.
• This Air Lift replacement bellows is an exact replacement for your original Air Lift air spring.
• It is made with sturdy rubber construction and synthetic fabric reinforcement.

Fitment

Specifications

What’s Included

One new Air Lift air spring in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Replacement Air Spring – Bellows Type
• Air Lift Replacement Air Spring – Sleeve Type
• Shop the complete Air Lift collection

Frequently Asked Questions

How do I confirm Air Lift 50290, the Replacement Air Spring – Bellows Type, is the correct replacement spring?
Match the original Air Lift kit or spring number, mounting pattern, bellows dimensions, air port, side or position, and the current application listing.

Should both air springs be replaced together?
Inspect both sides, brackets, airlines, and fittings. Replace any worn or leaking component; whether both springs require replacement depends on their condition and service history.

What commonly causes a replacement air spring to fail early?
Abrasion, misaligned or damaged brackets, overextension, heat, debris, incorrect pressure, leaks, and loose hardware can shorten service life. Correct the cause before installing the new spring.

How should the system be checked for leaks?
Inflate within the specified range and apply a manufacturer-approved leak-detection solution to fittings, lines, ports, and bellows. Repair leaks before loading or driving the vehicle.

Installation Instructions

1. Confirm Air Lift part number 50290, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift replacement air spring is the Replacement Air Spring – Bellows Type for 2003-2010 Dodge Ram 3500. Match the original kit or spring number, mounting pattern, bellows dimensions, air-port location, operating range, position, and surrounding bracket condition before replacing an individual spring.

Key Features

• Proper Ride Height Inflated range of 4.0 to 6.0 inches.
• Maximum Diameter 7.0 inches.
• A: The inflated proper ride height is 4.0 to 6.0 inches.
• Steel Girdle Ring Provides additional structural reinforcement.
• Durable construction designed for long service life.

Fitment

Specifications

What’s Included

One new Air Lift air spring in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Replacement Air Spring – Bellows Type
• Air Lift Replacement Air Spring – Sleeve Type
• Shop the complete Air Lift collection

Frequently Asked Questions

How do I confirm Air Lift 50294, the Replacement Air Spring – Bellows Type, is the correct replacement spring?
Match the original Air Lift kit or spring number, mounting pattern, bellows dimensions, air port, side or position, and the current application listing.

Should both air springs be replaced together?
Inspect both sides, brackets, airlines, and fittings. Replace any worn or leaking component; whether both springs require replacement depends on their condition and service history.

What commonly causes a replacement air spring to fail early?
Abrasion, misaligned or damaged brackets, overextension, heat, debris, incorrect pressure, leaks, and loose hardware can shorten service life. Correct the cause before installing the new spring.

How should the system be checked for leaks?
Inflate within the specified range and apply a manufacturer-approved leak-detection solution to fittings, lines, ports, and bellows. Repair leaks before loading or driving the vehicle.

Installation Instructions

1. Confirm Air Lift part number 50294, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift replacement air spring is the Replacement Air Spring – Bellows Type for 2009-2010 Dodge Ram 1500. Match the original kit or spring number, mounting pattern, bellows dimensions, air-port location, operating range, position, and surrounding bracket condition before replacing an individual spring.

Key Features

• This bellows has an inflated proper ride height of 5.0 to 7.0 inches, and a maximum diameter of 7.0 inches.
• The replacement bellows features genuine high-strength, rust-proof Zytel endcaps, and is reinforced with a steel girdle ring.
• This Air Lift replacement bellows is an exact replacement for your original Air Lift air spring.
• It is made with sturdy rubber construction and synthetic fabric reinforcement.

Fitment

Specifications

What’s Included

One new Air Lift air spring in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Replacement Air Spring – Bellows Type
• Air Lift Replacement Air Spring – Sleeve Type
• Shop the complete Air Lift collection

Frequently Asked Questions

How do I confirm Air Lift 50293, the Replacement Air Spring – Bellows Type, is the correct replacement spring?
Match the original Air Lift kit or spring number, mounting pattern, bellows dimensions, air port, side or position, and the current application listing.

Should both air springs be replaced together?
Inspect both sides, brackets, airlines, and fittings. Replace any worn or leaking component; whether both springs require replacement depends on their condition and service history.

What commonly causes a replacement air spring to fail early?
Abrasion, misaligned or damaged brackets, overextension, heat, debris, incorrect pressure, leaks, and loose hardware can shorten service life. Correct the cause before installing the new spring.

How should the system be checked for leaks?
Inflate within the specified range and apply a manufacturer-approved leak-detection solution to fittings, lines, ports, and bellows. Repair leaks before loading or driving the vehicle.

Installation Instructions

1. Confirm Air Lift part number 50293, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift replacement air spring is the Replacement Air Spring – Bellows Type for 2016-2017 Chevrolet Silverado 1500. Match the original kit or spring number, mounting pattern, bellows dimensions, air-port location, operating range, position, and surrounding bracket condition before replacing an individual spring.

Key Features

• It consists of steel girdle ring and has high burst pressure.
• This replacement air spring is designed to replace air spring when it is heavily damaged.
• It is made from rubber with synthetic fabric reinforcement which ensures extreme durability.

Fitment

Specifications

What’s Included

One new Air Lift air spring in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Replacement Air Spring – Bellows Type
• Air Lift Replacement Air Spring – Sleeve Type
• Shop the complete Air Lift collection

Frequently Asked Questions

How do I confirm Air Lift 50297, the Replacement Air Spring – Bellows Type, is the correct replacement spring?
Match the original Air Lift kit or spring number, mounting pattern, bellows dimensions, air port, side or position, and the current application listing.

Should both air springs be replaced together?
Inspect both sides, brackets, airlines, and fittings. Replace any worn or leaking component; whether both springs require replacement depends on their condition and service history.

What commonly causes a replacement air spring to fail early?
Abrasion, misaligned or damaged brackets, overextension, heat, debris, incorrect pressure, leaks, and loose hardware can shorten service life. Correct the cause before installing the new spring.

How should the system be checked for leaks?
Inflate within the specified range and apply a manufacturer-approved leak-detection solution to fittings, lines, ports, and bellows. Repair leaks before loading or driving the vehicle.

Installation Instructions

1. Confirm Air Lift part number 50297, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift replacement air spring is the Replacement Air Spring – Bellows Type. Match the original kit or spring number, mounting pattern, bellows dimensions, air-port location, operating range, position, and surrounding bracket condition before replacing an individual spring.

Key Features

• This bellows has an inflated proper ride height of 3.5 to 5.0 inches, and a maximum diameter of 6.5 inches.
• The replacement bellows features genuine high-strength, rustproof Zytel endcaps and is reinforced with a steel girdle ring.
• This Air Lift replacement bellows is an exact replacement for your original Air Lift air spring.
• It is made with sturdy rubber construction and synthetic fabric reinforcement.

Fitment

Specifications

What’s Included

One new Air Lift air spring in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Replacement Air Spring – Bellows Type
• Air Lift Replacement Air Spring – Sleeve Type
• Shop the complete Air Lift collection

Frequently Asked Questions

How do I confirm Air Lift 50207, the Replacement Air Spring – Bellows Type, is the correct replacement spring?
Match the original Air Lift kit or spring number, mounting pattern, bellows dimensions, air port, side or position, and the current application listing.

Should both air springs be replaced together?
Inspect both sides, brackets, airlines, and fittings. Replace any worn or leaking component; whether both springs require replacement depends on their condition and service history.

What commonly causes a replacement air spring to fail early?
Abrasion, misaligned or damaged brackets, overextension, heat, debris, incorrect pressure, leaks, and loose hardware can shorten service life. Correct the cause before installing the new spring.

How should the system be checked for leaks?
Inflate within the specified range and apply a manufacturer-approved leak-detection solution to fittings, lines, ports, and bellows. Repair leaks before loading or driving the vehicle.

Installation Instructions

1. Confirm Air Lift part number 50207, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift replacement air spring is the Replacement Air Spring – Bellows Type for 2011-2017 Chevrolet Express 2500. Match the original kit or spring number, mounting pattern, bellows dimensions, air-port location, operating range, position, and surrounding bracket condition before replacing an individual spring.

Key Features

• This bellows has an inflated proper ride height of 4.0 to 6.0 inches and a maximum diameter of 7.0 inches.
• The replacement bellows features genuine high-strength, rust-proof Zytel endcaps and is reinforced with a steel girdle ring.
• This Air Lift replacement bellows is an exact replacement for your original Air Lift air spring.
• It is made with sturdy rubber construction and synthetic fabric reinforcement.

Fitment

Specifications

What’s Included

One new Air Lift air spring in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Replacement Air Spring – Bellows Type
• Air Lift Replacement Air Spring – Sleeve Type
• Shop the complete Air Lift collection

Frequently Asked Questions

How do I confirm Air Lift 50252, the Replacement Air Spring – Bellows Type, is the correct replacement spring?
Match the original Air Lift kit or spring number, mounting pattern, bellows dimensions, air port, side or position, and the current application listing.

Should both air springs be replaced together?
Inspect both sides, brackets, airlines, and fittings. Replace any worn or leaking component; whether both springs require replacement depends on their condition and service history.

What commonly causes a replacement air spring to fail early?
Abrasion, misaligned or damaged brackets, overextension, heat, debris, incorrect pressure, leaks, and loose hardware can shorten service life. Correct the cause before installing the new spring.

How should the system be checked for leaks?
Inflate within the specified range and apply a manufacturer-approved leak-detection solution to fittings, lines, ports, and bellows. Repair leaks before loading or driving the vehicle.

Installation Instructions

1. Confirm Air Lift part number 50252, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.