AirDog Universal High-Flow Suction Tube Kit

AirDog Universal High-Flow Suction Tube Kit

AirDog 901-01-0351-QC adds a high-flow draw-straw pickup to supply an aftermarket diesel lift pump. The 5/8-inch tube fits through the tank top; suction-tube length and clearance must be set with the tank supported in its installed shape.

Key Features

• 5/8-inch high-flow suction tube
• 7-foot length of 1/2-inch fuel hose
• Bulkhead-mounted tank pickup
• Retains the original engine-return connection

Fitment

Specifications

Whats Included

• High-flow suction tube assembly
• 7-foot 1/2-inch fuel hose
• Quick-connect fittings and application adapters listed in the exact installation guide

About AirDog

PureFlow AirDog develops diesel lift pumps, fuel air-separation systems and installation/service components. Original AirDog, II-5G, Raptor and factory-replacement pump systems use different filtration, mounting and pressure-control arrangements.

Related Parts

• Browse AirDog, Raptor and DieselRx products brand browsing, not a compatibility claim

FAQ

What is the 901-01-0351-QC?

It adds a high-flow draw-straw pickup to supply an aftermarket diesel lift pump. The 5/8-inch tube fits through the tank top; suction-tube length and clearance must be set with the tank supported in its installed shape.

What application does this version fit?

Universal, tank-specific installation for a compatible aftermarket diesel lift pump. Requires tank access, a suitable mounting location and the clearances in the manufacturer guide.

What is included with this listing?

High-flow suction tube assembly; 7-foot 1/2-inch fuel hose; Quick-connect fittings and application adapters listed in the exact installation guide.

Does this replace every similar-looking component?

No. Match the products function, connections and complete system configuration; appearance alone does not establish compatibility.

How should pressure or electrical setup be selected?

Use the actual engine and system requirements in the linked guide. A GPH rating is flow, not pressure; increasing pressure beyond specification can damage the system.

What should be checked before installation?

Check the installation location, connections, required tools and supplied components against the exact guide. Do not adapt a different vehicle kit solely because the pump looks similar.

Are additional parts supplied automatically?

No. A gauge, sender, additional fittings, separate regulator or complete fuel system is included only when expressly named in Whats Included.

What should be checked before driving?

Follow the priming and startup procedure, inspect every fuel and electrical connection, verify pressure with appropriate equipment, and check for leakage and hose abrasion.

Installation Instructions

1. Safely gain access by lowering the supported fuel tank or removing the bed as directed.
2. Select a tank-top location with clearance below the bed and away from the sending unit.
3. Cut and position the pickup using the manufacturers tank-clearance instructions; a tube cut too short can draw air at low fuel levels.
4. Secure the bulkhead and hose connections, retain the engine return, and check for leaks.

Read the manufacturer installation guide.