Akrapovic 11-12 BMW 1 Series M Coupe (E82) Tail Pipe Set (Carbon)

The Akrapovic TP-CT/5 Carbon Tail Pipe Set is purpose-built for the legendary 2011-2012 BMW 1 Series M Coupe (E82), the rarest and most driver-focused M car of its generation. Hand-laid carbon fiber construction sheds weight from the rear of the 1M platform while delivering the unmistakable gloss weave finish that marks a properly finished M build. The TP-CT/5 bolts directly onto Akrapovic exhaust systems on the E82 chassis, completing the package with factory-level fitment and motorsport-grade material quality developed through Akrapovic’s competition programs. At just 0.30 kg for the set, these tips reduce unsprung rear mass and contribute to the balanced handling the 1M Coupe is celebrated for.

This Part Fits

Specifications

What’s Included

• Left carbon fiber tail pipe tip
• Right carbon fiber tail pipe tip
• Mounting hardware
• Akrapovic installation instructions

Frequently Asked Questions

Does the Akrapovic TP-CT/5 fit both 2011 and 2012 BMW 1M Coupe models?

Yes. The TP-CT/5 is designed to fit the full production run of the BMW 1 Series M Coupe (E82), which spans the 2011 and 2012 model years. Both years share the same chassis and exhaust outlet geometry.

Do I need an Akrapovic exhaust system to use the TP-CT/5?

Yes. The TP-CT/5 is engineered to fit Akrapovic slip-on or evolution line exhaust systems on the E82 1M Coupe. It is not compatible with the factory OEM exhaust due to differences in outlet sizing and mounting configuration.

How much weight does the TP-CT/5 save?

The complete TP-CT/5 tip set weighs 0.30 kg, providing a weight reduction over factory steel tips. While modest in absolute terms, every gram removed from the rear of the 1M Coupe contributes to the front-rear balance the car is known for.

Is the BMW 1 Series M Coupe the only car this part fits?

Yes. The TP-CT/5 was developed exclusively for the 2011-2012 BMW 1 Series M Coupe (E82). It is not cross-compatible with standard 128i or 135i E82 coupes or any other BMW model.

Will the carbon fiber tips fade or delaminate over time?

Akrapovic uses pre-preg carbon fiber with a sealed gloss coat rated for sustained exhaust temperatures. Under normal street and occasional track use, the tips maintain their structural integrity and finish for the life of the exhaust system with standard care.

Can I install the TP-CT/5 myself at home?

Yes. Installation is a bolt-on process using the included hardware. Experienced DIY mechanics familiar with exhaust work can complete the swap in under an hour. Professional installation ensures perfect alignment relative to the rear diffuser and bumper cut-outs.

Does changing tail pipe tips affect the exhaust sound on my 1M?

No. The TP-CT/5 tips do not alter the exhaust note of the 1M Coupe. Sound character is determined entirely by the muffler and piping configuration of the Akrapovic exhaust system. The TP-CT/5 is an aesthetic and weight-reduction upgrade only.

What warranty covers the Akrapovic TP-CT/5?

Akrapovic backs the TP-CT/5 with a 2-year manufacturer warranty against defects in materials and workmanship under normal operating conditions. The warranty does not cover damage resulting from incorrect installation or track/racing use.

How rare is the BMW 1M Coupe and does Akrapovic make parts specifically for it?

BMW produced only 6,309 units of the 1 Series M Coupe globally, making it one of the most collectible modern M cars. Akrapovic developed a dedicated range of exhaust products for the 1M including this TP-CT/5 tip set, the slip-on line, and evolution line systems, recognizing the car’s performance and collector status.

Installation Instructions

1. Allow the exhaust system to cool completely before beginning installation.
2. Verify that an Akrapovic exhaust system is installed on the E82 1M Coupe before proceeding.
3. Slide each carbon fiber tip over the corresponding Akrapovic outlet pipe.
4. Center the tips within the rear bumper cut-outs for symmetrical alignment.
5. Hand-tighten the mounting hardware, check alignment from both sides, then torque to specification per the included instruction sheet.
6. Start the vehicle and confirm tips are secure with no contact against surrounding bodywork.