Akrapovic 14-17 Audi RS7 Sportback (C7) Evolution Line Cat Back (Titanium) w/ Carbon Tips

The Akrapovic S-AU/TI/4H Evolution Line Cat-Back Exhaust is the definitive upgrade for the 2014-2017 Audi RS7 Sportback C7. Built entirely from aerospace-grade titanium and finished with four oversized carbon fiber tips, this system adds 16 hp and 20 Nm of torque while cutting 12.6 kg of exhaust weight. Akrapovic S-AU/TI/4H connects directly to the factory catalytic converters on the 4.0 TFSI bi-turbo V8 quattro engine, delivering a deep, valve-controlled motorsport soundtrack without any modification. Every Akrapovic S-AU/TI/4H is handcrafted in Slovenia and backed by a 3-year manufacturer warranty.

Fitment

Specifications

What’s Included

• Titanium cat-back link pipe
• Titanium front silencer section
• Titanium center silencer section
• Titanium rear silencer section
• 4 x 120 mm black carbon fiber exhaust tips
• Stainless clamps and mounting hardware
• Akrapovic installation instructions

Frequently Asked Questions

Does the Akrapovic S-AU/TI/4H fit all 2014-2017 Audi RS7 Sportback C7 trims?

Yes. The S-AU/TI/4H is a direct bolt-on fit for 2014-2017 RS7 Sportback C7 Premium Plus and Prestige trim models equipped with the 4.0 TFSI V8 bi-turbo quattro engine.

How much power does the Akrapovic S-AU/TI/4H add to the RS7?

The S-AU/TI/4H adds 12 kW (approximately 16 hp) at 5,900 rpm and 20 Nm of additional torque at 2,900 rpm on the stock RS7 ECU with no tuning required.

Will the S-AU/TI/4H work with the factory RS7 exhaust valve system?

Yes. The Akrapovic S-AU/TI/4H is fully compatible with the OEM RS7 exhaust valve controls, preserving your comfort and sport sound modes.

Do I need to remap the ECU after installing the Akrapovic RS7 cat-back?

No ECU tune is required. The power gains listed are achieved with the stock RS7 engine management. An optional tune may yield additional performance.

How much weight does the S-AU/TI/4H save over the stock RS7 exhaust?

The S-AU/TI/4H system weighs 15.5 kg versus the OEM 28.1 kg, reducing exhaust weight by 12.6 kg or 34.8 percent for improved unsprung weight and quicker throttle response.

What do the carbon fiber tips on the S-AU/TI/4H look like?

The system includes four 120 mm black carbon fiber tips that exit at the rear of the RS7 Sportback, providing an aggressive motorsport appearance that matches the factory body lines.

How loud is the Akrapovic Evolution Line cat-back on the RS7?

With the factory exhaust valves open, the S-AU/TI/4H delivers a deep, aggressive V8 note that rivals track-purpose systems. Valves closed maintains a refined, highway-appropriate exhaust note.

Is the S-AU/TI/4H a special order item?

Yes. The Akrapovic S-AU/TI/4H is a special order product. Please allow additional processing time. Contact us before ordering if you need a specific delivery window.

Where is the Akrapovic S-AU/TI/4H manufactured?

Every S-AU/TI/4H system is handcrafted in Slovenia at Akrapovic’s main production facility, using the same methods and materials as their MotoGP and World Superbike racing exhaust systems.

What warranty comes with the Akrapovic S-AU/TI/4H?

Akrapovic covers the S-AU/TI/4H with a 3-year manufacturer warranty against defects in materials and workmanship.

Installation Instructions

1. Lift the vehicle safely on a proper lift or jack stands and allow the OEM exhaust to cool completely.
2. Loosen and remove the factory cat-back exhaust clamps and rubber hangers beginning at the mid-pipe connection point.
3. Lower and remove the OEM cat-back section. Retain all rubber hangers for reuse.
4. Dry-fit the Akrapovic S-AU/TI/4H link pipe to the catalytic converter outlet and verify alignment before tightening.
5. Hang the front silencer section from the OEM rubber hangers and slide onto the link pipe.
6. Connect and position the center silencer and rear silencer sections using the supplied clamps, leaving all connections loose for alignment.
7. Attach the four carbon fiber tips to the rear silencer outlets per the included Akrapovic template.
8. Verify all sections are centered and do not contact body panels or underbody components.
9. Torque all clamps to Akrapovic specification, then start the engine and check for exhaust leaks.
10. Reconnect the OEM exhaust valve actuator wiring to the S-AU/TI/4H valve assembly if applicable.