Akrapovic 2018 Porsche 911 GT3 (991.2) Tail Pipe Set (Titanium)

The Akrapovic TP-T/S/17 Titanium Tail Pipe Set brings a lightweight, motorsport-grade upgrade to the 2018-2019 Porsche 911 GT3 991.2 and 2019 Speedster exhaust outlets. Weighing 0.80 kg for the complete set versus 1.20 kg for the factory units, TP-T/S/17 sheds 0.40 kg from the rear of the car with a simple bolt-on installation that uses all existing OEM mounting hardware. The brushed titanium finish complements the GT3’s focused performance aesthetic and resists the heat discoloration that typically marks steel exhaust tips over time, keeping the Porsche’s rear presentation as sharp on lap 100 as it was on day one.

This Part Fits

Specifications

What’s Included

• 1x left titanium tail pipe
• 1x right titanium tail pipe
• Mounting hardware
• Official Akrapovic installation instructions

Frequently Asked Questions

Does TP-T/S/17 fit the 2018 and 2019 Porsche 911 GT3 (991.2)?

Yes. The Akrapovic TP-T/S/17 is confirmed to fit both the 2018 and 2019 Porsche 911 GT3 (991.2 chassis) as a direct bolt-on replacement.

Does TP-T/S/17 also fit the 2019 Porsche 911 Speedster?

Yes. The 2019 Porsche 911 Speedster uses the same rear exhaust configuration as the 991.2 GT3, so the TP-T/S/17 fits the Speedster as a direct replacement as well.

How does TP-T/S/17 differ from TP-T/S/19?

The TP-T/S/19 has a wider fitment range covering the 991 generation GT3 (2014-2016) in addition to 991.2 GT3, GT3 RS, and Speedster. The TP-T/S/17 is focused specifically on the 2018-2019 GT3 (991.2) and Speedster. Both are titanium brushed finish sets.

What weight savings does TP-T/S/17 provide over stock?

The TP-T/S/17 complete set weighs 0.80 kg compared to the factory 1.20 kg steel tips, a reduction of 0.40 kg from the rear exhaust outlets.

Is professional installation required for TP-T/S/17?

No. The TP-T/S/17 uses all factory Porsche mounting points and can typically be installed in under 30 minutes with basic hand tools. Professional installation is recommended for best results.

Will TP-T/S/17 change the sound of my 911 GT3?

The tail pipe tips have minimal effect on exhaust sound on their own. For a more dramatic exhaust note, pair the TP-T/S/17 with an Akrapovic Slip-On Race Line system designed for the 991.2 GT3.

Does the brushed finish on TP-T/S/17 require special maintenance?

No. Brushed titanium is naturally heat-resistant and does not require polishing or coating. Light cleaning with a soft cloth and automotive detailer is sufficient to maintain the finish.

Does Akrapovic warranty the TP-T/S/17?

Yes. Akrapovic covers the TP-T/S/17 with a 2-year warranty against manufacturing defects when purchased from an authorized dealer.

Installation Instructions

1. Allow the exhaust to cool fully before starting
2. Locate and remove all factory tail pipe mounting hardware on the 911 GT3 (991.2) rear exhaust outlets
3. Slide the factory tail pipes off the exhaust outlet stubs
4. Install the Akrapovic TP-T/S/17 titanium tips onto the outlet stubs
5. Hand-tighten all fasteners and verify symmetry within the bumper cutouts
6. Torque to specification per included instructions and test for any rattles before driving