Akrapovic 2020+ BMW X3 M/X3 M Competition (F97) Tail Pipe Set (Carbon)

The Akrapovic TP-CT/59 Carbon Fiber Tail Pipe Set is a handcrafted set of high gloss carbon exhaust tip covers engineered specifically for the 2020-2024 BMW X3 M and X3 M Competition (F97). Designed as an accessory for the Akrapovic Slip-On Line (Titanium) exhaust system on the X3 M F97, these TP-CT/59 carbon tail pipes use the same motorsport-grade woven carbon fiber and UV-resistant high gloss clear coat construction that Akrapovic applies throughout their performance accessory lineup. The result is a refined, aggressive rear appearance on the X3 M that complements any Akrapovic exhaust setup without any permanent modification to the vehicle.

Fitment

Specifications

What’s Included

• 1x Akrapovic TP-CT/59 Carbon Fiber Tail Pipe Set (complete set of tip covers)
• Mounting hardware and fasteners
• Akrapovic installation instructions

Frequently Asked Questions

Does the TP-CT/59 fit both the X3 M and X3 M Competition?

Yes. The TP-CT/59 carbon tail pipe set is confirmed fitment for both the 2020-2024 BMW X3 M and the 2020-2024 BMW X3 M Competition (F97). Both trims share the same exhaust outlet architecture on the F97 platform, making the TP-CT/59 compatible across the full X3 M range for those years.

Does this tail pipe set require the Akrapovic exhaust to be installed first?

Yes. The TP-CT/59 carbon tip covers are designed to mount onto a compatible Akrapovic Slip-On Line (Titanium) exhaust system for the BMW X3 M F97. They are not compatible with the OEM BMW X3 M exhaust. The Akrapovic exhaust system must be installed before fitting these carbon tips.

What years of BMW X3 M does the TP-CT/59 fit?

This set fits the 2020 through 2024 model year BMW X3 M (F97) in both M and M trim levels. The F97 generation entered the US market for the 2020 model year, and this set covers the full run of that platform generation through 2024.

Is the TP-CT/59 interchangeable with the TP-CT/60 for the X4 M?

No. The TP-CT/59 is specific to the BMW X3 M (F97) platform, while the TP-CT/60 is engineered for the BMW X4 M (F98). Although the X3 M and X4 M share the S58 engine, their exhaust outlet geometry differs, so each vehicle requires its dedicated Akrapovic tail pipe set. Do not interchange these between platforms.

Does installation require any bumper modification on the X3 M?

No. The TP-CT/59 uses direct bolt-on fitment with the included hardware. No cutting, drilling, or permanent modification to the X3 M F97 bumper or exhaust is required. All mounting fasteners are included in the set.

Is the TP-CT/59 street legal?

These are cosmetic tail pipe covers and do not affect exhaust emissions, sound levels, or catalytic converter function. Road legality is governed by the Akrapovic exhaust system they are attached to, not by these tip covers themselves.

What is the best way to maintain the carbon finish on these tips?

Hand wash using a pH-neutral car shampoo and apply a carnauba or ceramic spray wax periodically to protect the high gloss clear coat. Avoid abrasive brushes and solvent-based cleaners on the carbon surface. Because these covers are near the exhaust outlets, inspect periodically for stone chips and confirm fastener security after track use.

How does the Akrapovic carbon tip appearance compare to the OEM X3 M exhaust exits?

The OEM BMW X3 M exhaust outlets feature the factory stainless tip design. The TP-CT/59 replaces the visible tip appearance with a motorsport-grade woven carbon fiber surface with a distinctive high gloss clear coat weave, giving the rear of the X3 M a more premium and competition-focused visual character.

Does this set work with the Akrapovic Evolution Line for the BMW X3 M F97?

The TP-CT/59 is confirmed compatible with the Akrapovic Slip-On Line (Titanium) for the F97 platform. Compatibility with the Evolution Line depends on whether the tip mounting interface matches. Verify the specific Akrapovic exhaust system model before purchasing if you have an Evolution Line installed.

Installation Instructions

1. Confirm a compatible Akrapovic exhaust system is installed on the BMW X3 M F97 before beginning.
2. Allow the exhaust to cool fully before handling any tip covers or hardware.
3. Locate the tip mounting points on the Akrapovic muffler at each exhaust outlet.
4. Position the first carbon tip cover over the exhaust outlet and align the mounting tabs with the muffler receiver.
5. Insert fasteners by hand and confirm the cover sits flush before applying any torque.
6. Torque all fasteners to the specification listed in the Akrapovic instruction sheet included with the set.
7. Repeat for all remaining tip covers, working symmetrically across both sides of the vehicle.
8. Start the vehicle and inspect all covers for proper alignment and security after reaching operating temperature.