Akrapovic BMW M2 Coupe (G87) Tail Pipe Set – Chopped Carbon

Finish the rear end of your BMW M2 Coupe (G87) with the Akrapovic TP-CT/73/CF Tail Pipe Set in Chopped Carbon. This mandatory companion to the Akrapovic Slip-On Line and Evolution Line exhaust systems for the G87 brings an angular, motorsport-influenced “chopped” silhouette to the tailpipes, hand-crafted from lightweight carbon fiber over a titanium core. The result is a rear end that communicates pure performance intent without altering a single bolt of your exhaust system’s plumbing.

This Part Fits

Specifications

What’s Included

• 1 x Set of Chopped Carbon Fiber Tail Pipes for BMW M2 G87 (Left and Right)
• Mounting hardware kit
• Official Akrapovic installation instructions

Frequently Asked Questions

Is the Akrapovic TP-CT/73/CF required when purchasing an Akrapovic exhaust for the BMW M2 G87?

Yes. The TP-CT/73/CF is a mandatory companion part when ordering the Akrapovic Slip-On Line (Titanium) for the BMW M2 G87. The tail pipe set must be purchased separately to complete the exhaust system installation.

What is the difference between the TP-CT/73/CF and the TP-CT/69?

The TP-CT/73/CF features a chopped, short-cut angular tip profile. The TP-CT/69 uses a traditional octagonal carbon fiber sleeve design. Both are compatible with the same Akrapovic exhaust systems on the G87 M2. The choice is purely aesthetic.

Will the Akrapovic TP-CT/73/CF fit the BMW M3 G80 or M4 G82?

The TP-CT/73/CF is engineered specifically for the BMW M2 Coupe (G87). For M3 G80 and M4 G82, Akrapovic offers dedicated tail pipe sets. Please verify compatibility before ordering.

Does the TP-CT/73/CF fit the stock BMW M2 G87 exhaust?

No. The Akrapovic TP-CT/73/CF is designed to pair with Akrapovic exhaust systems, specifically the Slip-On Line or Evolution Line for the G87 M2. It is not compatible with the factory BMW exhaust outlet sizing.

Is the TP-CT/73/CF street legal in the United States?

The TP-CT/73/CF holds ECE type approval for EU markets. As a tail pipe cosmetic component, it does not affect emissions or engine management, and is generally permissible for street use throughout the United States. Always confirm local regulations.

How is the carbon fiber on the TP-CT/73/CF heat-resistant?

The carbon fiber outer sleeve is finished with a high-temperature clear coat that provides resistance to exhaust heat. The titanium inner structure acts as the primary heat barrier, protecting the carbon finish during normal operation.

Can I mix the TP-CT/73/CF with other Akrapovic tip styles on the G87?

Akrapovic designs their tail pipe sets as matched pairs. The TP-CT/73/CF provides a complete set for both left and right outlets. Mixing tip styles is not recommended and may result in asymmetric appearance.

What warranty does Akrapovic provide on the TP-CT/73/CF?

Akrapovic covers the TP-CT/73/CF with a 2-year manufacturer warranty against defects in materials and workmanship, provided the product is installed and maintained per Akrapovic guidelines.

Installation Instructions

1. Ensure the Akrapovic exhaust system (Slip-On Line or Evolution Line) is fully installed and cooled before fitting the tail pipe set.
2. Remove any temporary protective covering from the Akrapovic exhaust outlets.
3. Slide each TP-CT/73/CF tail pipe sleeve over the corresponding Akrapovic exhaust outlet pipe.
4. Align the chopped tips to achieve the desired orientation and visual symmetry.
5. Secure each tail pipe using the supplied clamp or mounting hardware, hand-tightening first to confirm alignment.
6. Verify both left and right tips are at matching heights and angles before applying final torque.
7. Start the vehicle, allow the exhaust to reach operating temperature, and re-check all mounting hardware for security.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.