Alcon 2021+ Ford F-150 Front Caliper Bracket Kit

Alcon 2021+ Ford F-150 Front Caliper Bracket Kit

Alcon BSK4415X618 is 2021+ ford f-150 front caliper bracket kit for 2021 onward Ford F-150 with the matching Alcon front brake system; verify the four-hole caliper interface. Match the service component to the installed brake system before disassembly to avoid ordering a similar-looking part with a different interface.

Key Features

• Package quantity: One bracket with mounting hardware
• Caliper interface: Four mounting holes
• Dedicated service component matched by size, position and brake-system interface.

Fitment

Match BSK4415X618 to the complete brake configuration and the application notes above.

Specifications

Whats Included

• One front caliper bracket
• Associated mounting hardware

The components listed above describe BSK4415X618. Separate service parts and other axle kits are not included unless expressly listed.

About Alcon

Alcon develops braking systems and replacement components for motorsport, performance road vehicles, trucks and specialized applications. Its Pro-System range pairs Alcon calipers with application-specific rotor and mounting packages. Service parts must be selected for the exact system.

Related Parts

• Ask our team to match components to your vehicle and installed brake kit

FAQ

What is the BSK4415X618?

It is an Alcon brake service component designed for 2021 onward Ford F-150 with the matching Alcon front brake system; verify the four-hole caliper interface.

What application does it fit?

2021 onward Ford F-150 with the matching Alcon front brake system; verify the four-hole caliper interface. Match the bracket to the kit and knuckle. A two-hole caliper uses a different bracket; one bracket does not complete both sides.

What is included?

One front caliper bracket; Associated mounting hardware. Package details apply to this listing.

Does it replace the factory brake component?

It services the specified Alcon brake system. A matching vehicle name does not establish compatibility with factory calipers or rotors.

Which measurements should I check?

Package quantity: One bracket with mounting hardware; Caliper interface: Four mounting holes. Match all applicable dimensions and interfaces.

What else should I check before ordering?

Check the position, quantity and exact installed brake-system configuration. Left and right directional components must be ordered for their designated sides.

Is professional installation recommended?

Brake work should be performed by a qualified technician using the current vehicle and Alcon procedures. Fastener torque, routing, clearances and safe operation must be verified.

What procedure should I follow after installation?

Follow the specified inspection and bedding procedure for the exact components. Bleed the system whenever the hydraulic circuit is opened, inspect for leaks and confirm pedal operation before driving.

Installation Instructions

1. Verify the vehicle, existing brake system and all supplied BSK4415X618 components against the current instructions.
2. Safely support the vehicle and remove the appropriate wheel or wheels.
3. Remove the worn components using the brake-system service procedure; support any displaced caliper without straining its hose.
4. Install the replacement components in the specified orientation, using required new hardware and the exact torque values from the current instructions.
5. Inspect clearances and line routing, bleed the hydraulic system if opened, and verify fluid level, leak-free operation and a firm pedal.
6. Refit the wheels, torque the wheel fasteners and complete the component-specific bedding and operational checks before normal use.