Alcon Jeep Wrangler JL/Gladiator Front Brake Pad Set

Alcon Jeep Wrangler JL/Gladiator Front Brake Pad Set

Alcon PNS4415X511.4 is jeep wrangler jl/gladiator front brake pad set for Alcon front brake kit BKF1551K06 for Jeep Wrangler JL/Gladiator JT; also documented for BKF1551K61 Bronco/Ranger kit. Match the service component to the installed brake system before disassembly to avoid ordering a similar-looking part with a different interface.

Key Features

• Caliper family: CIR15
• Compound: AV1
• Package quantity: One front axle pad set
• Specified for the matching Alcon caliper and brake-kit configuration.

Fitment

Match PNS4415X511.4 to the complete brake configuration and the application notes above.

Specifications

Whats Included

• One front axle pad set

The components listed above describe PNS4415X511.4. Separate service parts and other axle kits are not included unless expressly listed.

About Alcon

Alcon develops braking systems and replacement components for motorsport, performance road vehicles, trucks and specialized applications. Its Pro-System range pairs Alcon calipers with application-specific rotor and mounting packages. Service parts must be selected for the exact system.

Related Parts

• Alcon Jeep Wrangler JL & Gladiator Front Big Brake Kit

FAQ

What is the PNS4415X511.4?

It is an Alcon brake pad set designed for Alcon front brake kit BKF1551K06 for Jeep Wrangler JL/Gladiator JT; also documented for BKF1551K61 Bronco/Ranger kit.

What application does it fit?

Alcon front brake kit BKF1551K06 for Jeep Wrangler JL/Gladiator JT; also documented for BKF1551K61 Bronco/Ranger kit. Match the exact pad suffix and caliper. These are replacement pads for the specified Alcon kits, not a general factory-caliper pad.

What is included?

One front axle pad set. Package details apply to this listing.

Does it replace the factory brake component?

It services the specified Alcon brake system. A matching vehicle name does not establish compatibility with factory calipers or rotors.

Which measurements should I check?

Caliper family: CIR15; Compound: AV1; Package quantity: One front axle pad set. Match all applicable dimensions and interfaces.

What else should I check before ordering?

Compare the installed caliper, backing-plate outline, pad thickness and compound. Similar-looking pads can have different retention or clearance requirements.

Is professional installation recommended?

Brake work should be performed by a qualified technician using the current vehicle and Alcon procedures. Fastener torque, routing, clearances and safe operation must be verified.

What procedure should I follow after installation?

Follow the specified inspection and bedding procedure for the exact components. Bleed the system whenever the hydraulic circuit is opened, inspect for leaks and confirm pedal operation before driving.

Installation Instructions

1. Verify the vehicle, existing brake system and all supplied PNS4415X511.4 components against the current instructions.
2. Safely support the vehicle and remove the appropriate wheel or wheels.
3. Remove the worn components using the brake-system service procedure; support any displaced caliper without straining its hose.
4. Install the replacement components in the specified orientation, using required new hardware and the exact torque values from the current instructions.
5. Inspect clearances and line routing, bleed the hydraulic system if opened, and verify fluid level, leak-free operation and a firm pedal.
6. Refit the wheels, torque the wheel fasteners and complete the component-specific bedding and operational checks before normal use.

Prop 65 Warning

WARNING: Cancer and Reproductive Harm. For more information, visit www.P65Warnings.ca.gov.