ARB Compressor Mdm Air Locker 24V

This ARB drivetrain component is the Compressor Mdm Air Locker 24V. Confirm the exact axle or differential model, spline count, gear ratio, carrier break, bearing and seal requirements, air-system compatibility, and all application notes before ordering.

Key Features

• Tires perform best when they are set at a pressure that is appropriate for the terrain.
• While highway use calls for a relatively high pressure rate lowering your air pressure will dramatically improve your 4x4s traction in a range of off road environments.
• Considered by 4×4 owners around the world to be a staple accessory for off road travel an ARB 4×4 Air Compressor provides an immediate source of compressed air anywhere a 12 or 24 volt power source is available.
• With an air bag equipped vehicle for example it is essential that the vehicle’s crush rate and air bag triggering is not altered when a bull bar is installed.
• What’s more we’re also constantly on the lookout for new ways to improve our business practices from distribution to customer service.
• Compressed air allows you the freedom to adjust the tire inflation level of your truck to suit the conditions.

Fitment

Specifications

What’s Included

One new ARB air compressor system in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.

About ARB

ARB develops vehicle-specific four-wheel-drive equipment, including protection, suspension, Air Lockers, compressed-air systems, racks, recovery equipment, lighting, and touring accessories. Every application, load rating, interface, and included component remains exact-part specific.

Important Disclosures

• California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.

Related Parts

• Shop all ARB products
• ARB Compressor Mdm Air Locker 12V
• ARB 11-21 Dodge RAM 1500 Airlocker 31-Spl 9.25in Rear ZF C-Clip Axle
• ARB Air Locker Switch Brkt 1Gang

Frequently Asked Questions

How do I confirm this fits the intended application?
Match the axle or differential model, spline count, gear ratio, carrier break, bearing and seal requirements, and every application note.

Does an ARB Air Locker include the compressor and air system?
Only components expressly listed for this exact part are included. Compressors, manifolds, switches, air line, bearings, seals, and installation kits may be separate.

Is professional differential setup required?
Differential installation requires correct backlash, bearing preload, gear contact, torque, sealing, and air-line routing. Qualified drivetrain installation is recommended.

Installation Instructions

1. Confirm ARB part number CKMA24, the complete application, and every required supporting component before beginning work.
2. Use the correct service procedure to inspect the axle and differential, then set bearings, backlash, contact pattern, fasteners, seals, and air-line routing to specification.
3. Fill with the specified lubricant, test air-system operation when applicable, inspect for leaks and abnormal noise, and recheck after the initial driving cycle.