ARB Forged Recovery Hitch

This ARB recovery component is the Forged Recovery Hitch. Verify its stated working limits, dimensions, attachment method, compatible recovery points, required supporting equipment, and the complete vehicle recovery plan before use.

Key Features

• A: The Working Load Limit (22,178 lb) is the maximum safe working load. The Minimum Breaking Strength (110,892 lb) is the point at which the hitch could fail under extreme load. Always stay well below the working load limit.
• Forged 7075 Aerospace Aluminum Extremely strong and lightweight construction.
• High Breaking Strength Minimum breaking strength of 110,892 lb for serious recovery use.
• Designed for use with soft shackles (not recommended for steel shackles).
• Always follow proper recovery techniques and never exceed the working load limit.
• A: It is designed and optimized for soft shackles. Using steel shackles may damage the hitch or reduce its effectiveness.

Fitment

Specifications

What’s Included

One new ARB tow strap in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.

About ARB

ARB develops vehicle-specific four-wheel-drive equipment, including protection, suspension, Air Lockers, compressed-air systems, racks, recovery equipment, lighting, and touring accessories. Every application, load rating, interface, and included component remains exact-part specific.

Important Disclosures

• California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.

Related Parts

• Shop all ARB products
• ARB Essentials Recovery Kit S2
• ARB Micro Recovery Bag Orange/Black Topographic Styling PVC Material
• ARB Premium Recovery Kit S2

Frequently Asked Questions

How do I know whether this recovery product is suitable for my vehicle?
Confirm its stated rating, vehicle mass, recovery method, compatible rated recovery points, connection hardware, and the full recovery system.

Can this be connected to a tow ball or unrated tie-down point?
No. Use only components and vehicle recovery points expressly rated for the planned load and direction.

When should recovery equipment be replaced?
Remove it from service after overload, impact, cuts, abrasion, heat damage, corrosion, deformation, damaged stitching, or any condition outside the manufacturer’s inspection limits.

Installation Instructions

1. Confirm ARB part number 10100080, the complete application, and every required supporting component before beginning work.
2. Inspect all rated recovery points and equipment, then configure the system for the planned load and direction without side-loading hardware.
3. After use, inspect for overload, cuts, abrasion, heat, corrosion, deformation, and damaged stitching before storing the equipment clean and dry.