ARB Intensity IQ Driving Lights

This ARB lighting component is the Intensity IQ Driving Lights. Confirm light function, voltage, beam pattern, dimensions, mounting method, wiring and switch requirements, included quantity, and road-use requirements.

Key Features

• Dimensions: 220mm (W) x 215mm (H) x 142mm (D) (8.7in x 8.5in x 5.6in).
• Distance at 1 Lux:Max Spot: 1350m (4429ft).
• Weight and Dimensions:Weight: 3.8kg (8.4lbs).
• LED Configuration:Super Spot: 4x Cree XP-P LEDs.

Fitment

Specifications

What’s Included

One new ARB driving light in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.

About ARB

ARB develops vehicle-specific four-wheel-drive equipment, including protection, suspension, Air Lockers, compressed-air systems, racks, recovery equipment, lighting, and touring accessories. Every application, load rating, interface, and included component remains exact-part specific.

Important Disclosures

• California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.

Related Parts

• Shop all ARB products
• ARB Intensity 21 Led Flood
• ARB Intensity SOLIS 21 1 Spot 1 Flood Kit With Loom
• ARB Intensity SOLIS 21 2 Flood Kit With Loom

Frequently Asked Questions

Is the wiring harness included with this ARB light?
Only components expressly stated for the exact part are included. Harnesses, switches, relays, covers, and mounting brackets may be sold separately.

Is this light legal for on-road use?
Road-use requirements depend on beam pattern, mounting, aiming, color, covers, and local law. Confirm the exact light classification and jurisdiction.

How do I prevent warning lights or electrical problems?
Use the specified harness, relay, fuse, switch, grounds, and any vehicle-specific integration module. Verify current draw and test every lighting function.

Installation Instructions

1. Confirm ARB part number ARBVX17, the complete application, and every required supporting component before beginning work.
2. Mount and aim the light with the specified brackets, then install the correct harness, relay, fuse, switch, connectors, and grounds.
3. Test every function, inspect wire clearance and current draw, confirm legal aiming and covers, and recheck mounts after the initial drive.