Set up the listed vehicle for its intended ride height and constant accessory load with this application-specific Old Man Emu coil spring. When undertaking 4X4 remote area travel, the need to carry sufficient fuel, water, vehicle spares and safety equipment invariably means that your 4WD will be fully loaded, placing a lot of strain on suspension components. As part of their integrated 4WD suspension systems, Old Man Emu designs a range of coil springs for each vehicle, enabling the installer Confirm the complete vehicle, load, position, paired components, and current ARB instructions before ordering.

Key Features

• Free Height:A: 390 mm / B: 390 mm.
• Spring Rate:387 lbf / in.
• Title:Old Man Emu – 2897 – Coil Spring Set.

Fitment

Specifications

What’s Included

One new Old Man Emu coilover springs package identified by manufacturer part number 2897. Springs, dampers, bushings, mounts, liners, fasteners, and fitting hardware are included only when expressly listed for this exact part number.

About Old Man Emu

Old Man Emu is ARB’s suspension division, developing integrated springs, dampers, and hardware for four-wheel-drive control, load support, and durability. Every rate, position, load range, and vehicle application remains part-number specific.

Related Old Man Emu Products

• Shop all Old Man Emu suspension products
• ARB / OME Coil Spring Front Prado 150
• ARB / OME Coil Spring Front Prado 4/03 On
• ARB / OME Coil Spring Front Prado 4/03 On

Frequently Asked Questions

How do I confirm Old Man Emu 2897 is correct for my vehicle?
Match the listed year, make, and model where published, then confirm drivetrain, axle position, body style, constant accessory load, intended ride height, and every current ARB application note.

How do I choose the correct Old Man Emu spring load?
Add the constant weight of bumpers, winches, racks, drawers, fuel systems, and other permanently installed equipment, then select only the ARB-listed load range.

Will an alignment be required after installing these springs?
Yes. Measure ride height, verify full suspension and steering travel, check brake-line and tire clearance, then complete a professional alignment and torque recheck.

Installation Instructions

Follow the current ARB instructions and vehicle service information for Old Man Emu part number 2897. Safely support the vehicle, record ride height, use the specified spring-handling and torque procedures, preserve brake, sensor, and tire clearance, verify full suspension travel, then complete the required alignment and fastener rechecks before normal driving.

Set up the listed vehicle for its intended ride height and constant accessory load with this application-specific Old Man Emu coil spring. When undertaking 4X4 remote area travel, the need to carry sufficient fuel, water, vehicle spares and safety equipment invariably means that your 4WD will be fully loaded, placing a lot of strain on suspension components. As part of their integrated 4WD suspension systems, Old Man Emu designs a range of coil springs for each vehicle, enabling the installer Confirm the complete vehicle, load, position, paired components, and current ARB instructions before ordering.

Key Features

• Free Height:A: 390 mm / B: 390 mm.
• Spring Rate:260 lbf / in.
• Title:Old Man Emu – 2895 – Coil Spring Set.

Fitment

Specifications

What’s Included

One new Old Man Emu coilover springs package identified by manufacturer part number 2895. Springs, dampers, bushings, mounts, liners, fasteners, and fitting hardware are included only when expressly listed for this exact part number.

About Old Man Emu

Old Man Emu is ARB’s suspension division, developing integrated springs, dampers, and hardware for four-wheel-drive control, load support, and durability. Every rate, position, load range, and vehicle application remains part-number specific.

Related Old Man Emu Products

• Shop all Old Man Emu suspension products
• ARB / OME Coil Spring Front Prado 150
• ARB / OME Coil Spring Front Prado 4/03 On
• ARB / OME Coil Spring Front Prado 4/03 On

Frequently Asked Questions

How do I confirm Old Man Emu 2895 is correct for my vehicle?
Match the listed year, make, and model where published, then confirm drivetrain, axle position, body style, constant accessory load, intended ride height, and every current ARB application note.

How do I choose the correct Old Man Emu spring load?
Add the constant weight of bumpers, winches, racks, drawers, fuel systems, and other permanently installed equipment, then select only the ARB-listed load range.

Will an alignment be required after installing these springs?
Yes. Measure ride height, verify full suspension and steering travel, check brake-line and tire clearance, then complete a professional alignment and torque recheck.

Installation Instructions

Follow the current ARB instructions and vehicle service information for Old Man Emu part number 2895. Safely support the vehicle, record ride height, use the specified spring-handling and torque procedures, preserve brake, sensor, and tire clearance, verify full suspension travel, then complete the required alignment and fastener rechecks before normal driving.