ARB Rock Sliders- For Use with 2020-2021 Jeep Gladiator JT

This ARB vehicle-protection component is the Rock Sliders- For Use with 2020-2021 Jeep Gladiator JT for 2020 Jeep Gladiator. Confirm body style, trim, chassis and bumper configuration, sensors, cameras, recovery equipment, mounting points, finish, and all stated exclusions.

Key Features

• The sliders are manufactured from multi-folded 4mm laser cut and pulse welded sheet steel.
• The plate is manufactured from 3mm laser cut and folded sheet steel and features a laser cut ARB logo at the front of the sill plate.
• The multi-folded slider uses chassis-mounted body mounts to spread the load along the length of the vehicle sills and not restrict breakover angle.
• The multi-folded sheet steel provides strength without the need for thicker material to keep weight to a minimum.
• ARB Rock Sliders.Vehicle-specific.Designed to Spread the Load and Protect Lower Sill Area Vehicle-specific design to suit the Jeep Gladiator..Development – To ensure we meet your expectations ARB invests heavily in research and development.
• These ARB Rock Sliders are made up of both the slider assembly and a lower body mount to spread the load and protect the vulnerable lower sill area of the JT when used off road.

Fitment

Specifications

What’s Included

One new ARB side step in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.

About ARB

ARB develops vehicle-specific four-wheel-drive equipment, including protection, suspension, Air Lockers, compressed-air systems, racks, recovery equipment, lighting, and touring accessories. Every application, load rating, interface, and included component remains exact-part specific.

Important Disclosures

• California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.

Related Parts

• Shop all ARB products
• ARB 20-21 Jeep Gladiator JT Rear Bumper No Tire Carrier
• ARB Bar Jl T/Stubby
• ARB Bullbar 8-10 OE Fog Intergrit Bondi w/ Bar Suit JL 180N

Frequently Asked Questions

Will this fit 2020 Jeep Gladiator with factory sensors and cameras?
Compatibility depends on the exact trim, bumper, sensor, camera, radar, recovery, and lighting configuration. Confirm every application note before disassembly.

Is every bull bar or bumper rated as a recovery point?
No. Use only recovery points and towing locations expressly rated for that purpose. A bumper or protection bar does not automatically establish a recovery rating.

Will installation require drilling, trimming, or calibration?
Requirements vary by exact vehicle and component. Review the current ARB instructions and account for sensors, cameras, wiring, bodywork, and driver-assistance calibration.

Installation Instructions

1. Confirm ARB part number 4450260, the complete application, and every required supporting component before beginning work.
2. Protect bodywork and wiring, account for sensors and cameras, and dry-fit every bracket before drilling, trimming, or tightening hardware.
3. Torque all mounts, verify clearance and driver-assistance functions, aim lights if fitted, and recheck hardware after the initial drive.