ARB Wind Break-Front 2000mm79In Fire Retardant Usa/Canada Spec

This ARB touring and camping component is the Wind Break-Front 2000mm79In Fire Retardant Usa/Canada Spec. Verify dimensions, capacity, mounting or power requirements, weather protection, vehicle clearance, included accessories, and intended operating conditions.

Key Features

• Designed to angle out from the awning windbreaks also offer additional protection from the rain and with a UVP50+ rating give extra shade and sun protection.
• But the addition of front and side windbreaks not only provides wind protection but helps secure the awning with an additional 4 tie down points per windbreak.

Fitment & Compatibility

Front windbreak for the matching 2000mm-wide ARB awning. Check the front sail-track attachment and awning generation. Not interchangeable with a side windbreak or a different front-panel width; awning sold separately.

Manufacturer part number: 813207. Select by the equipment model and mounting interface, not vehicle year alone.

Specifications

What’s Included

One new ARB awnings & panel in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.

About ARB

ARB develops vehicle-specific four-wheel-drive equipment, including protection, suspension, Air Lockers, compressed-air systems, racks, recovery equipment, lighting, and touring accessories. Every application, load rating, interface, and included component remains exact-part specific.

Important Disclosures

• California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.

Shop awnings, panels and shelter replacement parts

Related Parts

• Shop all ARB products
• ARB AWNING T-BOLT PACK
• ARB Altitude Hard Shell Electric Rooftop Tent
• ARB Aluminum Awning, Black Frame, 8.2FT x 8.2FT, Installed with LED Light Strip

Frequently Asked Questions

Will this ARB camping product fit my vehicle setup?
Confirm packed and deployed dimensions, mounting surface, vehicle clearance, load limits, power requirements, and compatibility with the rack or shelter system.

How do I confirm the correct replacement or accessory?
Match part number 813207 with the original equipment model and the compatibility notes above. Contact us with the awning or tent model if the original part number is unavailable.

What should be checked before travel?
Secure every latch, fastener, cover, cable, and mounting point, confirm vehicle clearance and load limits, and stow loose accessories.

Installation Instructions

1. Confirm ARB part number 813207, the complete application, and every required supporting component before beginning work.
2. Install mounts and power connections on surfaces rated for the product while maintaining vehicle, door, hatch, rack, and deployed-product clearance.
3. Secure all travel latches and wiring, test setup and operation, confirm load limits, and inspect the installation before every trip.