This AST Suspension 2000-02/2007 BMW X5 Lowering Springs – 30mm is a vehicle-specific lowering spring set selected by exact part number, chassis, drivetrain, body style, suspension configuration, and stated front and rear drop. Confirm every application note before ordering.

Key Features

• 30mm Drop: Precise 30mm lowering front and rear achieves aggressive stance without sacrificing suspension travel or ride quality.
• Progressive Spring Design: Variable rates provide linear response for performance driving yet absorb bumps like stock springs on highways.
• Vehicle-Specific Engineering: Developed exclusively for BMW X5 E53 chassis ensures perfect fit and OEM-like alignment after install.
• Direct bolt-on replacement for factory springs no modifications required.
• High-tensile chrome-silicon steel coiled on Wafios machines for maximum fatigue resistance and longevity.
• Requires spring compressor tool and alignment after install.

Fitment

Specifications

What’s Included

One new AST Suspension product in the exact part number, dimensions, rate, adjustment specification, and quantity identified on this page. Springs, dampers, top mounts, reservoirs, adjusters, links, tools, lines, fittings, and hardware are included only when expressly stated for this exact configuration.

About AST Suspension

AST Suspension develops performance springs, dampers, coilovers, top mounts, and motorsport suspension components. Vehicle fitment, dimensions, rates, adjustment functions, and included components remain exact-part specific.

Related Parts

• Shop the complete AST Suspension collection
• Shop suspension components
• AST 05/2020- BMW X5 XDRIVE Lowering Springs – 45mm/45mm (w/o air suspension)
• AST 07/2009-07/2013 BMW X5 Lowering Springs – 35mm
• AST 08/2018- BMW X5 XDRIVE Lowering Springs – 40mm/40mm

Frequently Asked Questions

How do I confirm these springs fit my vehicle?
Match the exact year, make, model, chassis, drivetrain, body style, engine, factory suspension, axle-load notes, and AST part number.

Will I need an alignment after installing lowering springs?
Yes. Measure ride height after the springs settle, then perform a complete alignment and verify tire, wheel, brake-line, and suspension clearance.

Can these springs be used with factory dampers?
Only when the exact AST application permits it. Check damper condition, available travel, bump-stop requirements, and every product-specific suspension note.

Is the advertised drop exact on every vehicle?
The stated drop is a target for the listed configuration. Actual ride height can vary with equipment, vehicle weight, spring isolators, damper condition, and prior suspension changes.

Installation Instructions

1. Confirm the exact AST part number, complete application or dimensional specification, included components, and current instructions before disassembly.
2. Support the vehicle at approved points and record the original ride height, alignment, suspension orientation, and adjustment settings.
3. Install components in the specified position and sequence using correct spring-compression, torque, preload, ride-height, and damper setup procedures.
4. Verify full suspension and steering travel, tire and wheel clearance, brake-line routing, fastener torque, and damper operation.
5. Settle the suspension, measure final ride height, complete a professional alignment, and recheck the installation after the initial driving cycles.

This AST Suspension 2000-02/2007 BMW X5 Lowering Springs – 30mm is a vehicle-specific lowering spring set selected by exact part number, chassis, drivetrain, body style, suspension configuration, and stated front and rear drop. Confirm every application note before ordering.

Key Features

• 30mm Drop Height: Lowers ride stance for enhanced stability and sharper cornering without sacrificing comfort.
• Progressive Spring Design: Varies rates for smooth initial compression and firm support under load balancing drop and control.
• Direct bolt-on replacement no vehicle modifications needed.
• Hand-built quality with premium steel construction.
• Yes direct fit for 2001-2006 BMW X5 3.0i models bolt-on with no changes.
• High-tensile chrome-silicon steel for corrosion resistance and long-term spring rate retention.

Fitment

Specifications

What’s Included

One new AST Suspension product in the exact part number, dimensions, rate, adjustment specification, and quantity identified on this page. Springs, dampers, top mounts, reservoirs, adjusters, links, tools, lines, fittings, and hardware are included only when expressly stated for this exact configuration.

About AST Suspension

AST Suspension develops performance springs, dampers, coilovers, top mounts, and motorsport suspension components. Vehicle fitment, dimensions, rates, adjustment functions, and included components remain exact-part specific.

Related Parts

• Shop the complete AST Suspension collection
• Shop suspension components
• AST 05/2020- BMW X5 XDRIVE Lowering Springs – 45mm/45mm (w/o air suspension)
• AST 07/2009-07/2013 BMW X5 Lowering Springs – 35mm
• AST 08/2018- BMW X5 XDRIVE Lowering Springs – 40mm/40mm

Frequently Asked Questions

How do I confirm these springs fit my vehicle?
Match the exact year, make, model, chassis, drivetrain, body style, engine, factory suspension, axle-load notes, and AST part number.

Will I need an alignment after installing lowering springs?
Yes. Measure ride height after the springs settle, then perform a complete alignment and verify tire, wheel, brake-line, and suspension clearance.

Can these springs be used with factory dampers?
Only when the exact AST application permits it. Check damper condition, available travel, bump-stop requirements, and every product-specific suspension note.

Is the advertised drop exact on every vehicle?
The stated drop is a target for the listed configuration. Actual ride height can vary with equipment, vehicle weight, spring isolators, damper condition, and prior suspension changes.

Installation Instructions

1. Confirm the exact AST part number, complete application or dimensional specification, included components, and current instructions before disassembly.
2. Support the vehicle at approved points and record the original ride height, alignment, suspension orientation, and adjustment settings.
3. Install components in the specified position and sequence using correct spring-compression, torque, preload, ride-height, and damper setup procedures.
4. Verify full suspension and steering travel, tire and wheel clearance, brake-line routing, fastener torque, and damper operation.
5. Settle the suspension, measure final ride height, complete a professional alignment, and recheck the installation after the initial driving cycles.