ATI Damper – 20+ Toyota Supra / 19+ BMW – Z4 – B587.074 – 10 Percent Under Drive – AL – 6 Groove –

ATI Super Damper 918352 is an engine and drive-system specific harmonic damper in the 20+ Toyota Supra / 19+ BMW – Z4 – B587.074 – 10 Percent Under Drive – AL – 6 Groove – configuration. Confirm the crankshaft, balance requirement, hub, shell, diameter, groove arrangement, accessory drive, and every ATI application note before ordering.

Key Features

• Shell Material: 7.074″ Aluminum, 6-rib.
• Hub Material: Steel with inner shell 916501, bore 1.577″.
• Inertia Weight: 2.20 lbs, 3 ring.
• Direct fit replacement for OEM units (Toyota Part # 13470-WAA04 & BMW Part # 11238650741).
• SFI 18.1 Certified for competition use.
• Direct replacement for the OEM unit.

Fitment

Specifications

What’s Included

One new ATI component identified by manufacturer part number 918352. Hubs, pulleys, belts, bolts, washers, spacers, keys, tools, and installation hardware are included only when expressly stated for this exact part number.

About ATI Performance Products

ATI develops tunable and serviceable Super Dampers, crank hubs, pulleys, transmission components, and engine service hardware for performance and competition applications. Compatibility remains exact-part and engine-system specific.

Related ATI Components

• ATI Damper 20+ TOYOTA SUPRA / 19+ BMW Z4 B58/ 918351
• ATI Damper – 6.78in – AL – 6 Grv – 10 Per UD – LS1/2/3/6/L76 – 97-13 28T 8mm HTD Drive Rear – 3 Rng
• ATI Damper – 6.78in – Alum – 6 Grv – Toyota Supra – 94-98 – JZ80 – 15 Percent OD – Req gatK06077

Browse the ATI collection for additional dampers, pulleys, and service components.

Frequently Asked Questions

Does ATI 918352 match my engine and accessory drive?
Match the engine family, crank snout and keyway, balance type, hub, outside diameter, belt grooves, accessory drive, and every application note. The stated configuration is 20+ Toyota Supra / 19+ BMW – Z4 – B587.074 – 10 Percent Under Drive – AL – 6 Groove -.

Is this ATI Super Damper rebuildable?
ATI Super Dampers are serviceable. Inspect the shell, hub, fasteners, timing marks, and elastomers according to the current ATI instructions and service intervals.

Do I need a special installer for this damper?
Use the correct crankshaft damper installation tool and the exact fastener, washer, spacer, key, hub, and torque procedure for the engine. Never hammer the damper onto the crankshaft.

Installation Instructions

Use the current ATI instructions and the engine manufacturer’s service information. Verify crankshaft and hub condition, key and spacer placement, required installer, fastener and washer, runout, pulley alignment, belt routing, clearances, and final torque. Never draw the damper on with an undersized or partially engaged bolt.