Autometer 5 piece Kit (Mech Speed/Elec Oil Press/Water Temp/Volt/Fuel Level)

Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.

Key Features

• Oil Pressure Sender (4327): Electric 1/8-27 NPT thread, 0-100 PSI range threads into oil galley for responsive pressure monitoring.
• Bulb & Socket Assemblies with Covers: Includes two 12V bulbs, sockets, red/green lens covers, and mounting hardware for clear illumination on volt and other gauges.
• Water Temp Sender (2258): 3/8-18 NPT thread, 140-300F range mounts in cylinder head or intake manifold for reliable coolant temperature tracking.
• Hardware included fits standard AutoMeter gauge panels. Torque senders to spec (oil 18 ft-lbs, water 15 ft-lbs).
• Oil pressure 1/8-27 NPT, water temp 3/8-18 NPT, fuel 5/8-18 inverted flare, all standard for Chevy V8s.
• Senders calibrated to exact OEM-equivalent specs.

Fitment

Specifications

What’s Included

One new AutoMeter product identified by manufacturer part number 1300. Senders, adapters, fittings, wiring, mounting hardware, gauges, and companion components are included only when expressly stated for this exact part number.

About AutoMeter

AutoMeter develops performance instrumentation, gauge mounting solutions, sensors, data products, battery equipment, and installation components for street, competition, marine, and professional workshop use.

Related AutoMeter Products

• Autometer AutoGage 3-Gauge Console 52.4mm Mech 0-100 PSI Oil Press/ 10-16 V / 130-280 Deg Water Temp
• Autometer AutoGage Two-Gauge Console 2-1/16in Mech 0-100 PSI Oil Press/100-280 Deg Water Temp-Black
• Autometer AutoGage Two-Gauge Console 52.4mm Mech 0-100 PSI Oil Press / 130-280 Deg Water Temp- Black

Browse the AutoMeter collection for additional gauges, mounts, sensors, and accessories.

Frequently Asked Questions

What signal or sender does AutoMeter gauge 1300 require?
The requirement depends on whether this exact gauge is mechanical, electric, digital, GPS, or vehicle-data based. Use only the sender, tubing, harness, adapter, and signal type specified by AutoMeter.

Will AutoMeter 1300 fit my existing gauge mount?
Confirm the stated gauge diameter, case depth, bezel clearance, rear connection clearance, retaining method, and wiring or tubing path before choosing a mount.

Is calibration required for AutoMeter 1300?
Calibration depends on the measurement and signal source. Follow the current AutoMeter instructions for this exact part and verify the reading against known operating data before relying on it.

What must be tested after wiring AutoMeter 1300?
Verify power, ground, illumination, dimming, signal behavior, sender operation, warning functions, and stable readings through the expected operating range.

Installation Instructions

Follow the current AutoMeter instructions for this exact gauge. Verify the signal or sender, pressure or temperature connection, power, ground, fuse, illumination, mounting depth, tubing or wiring protection, calibration, leak checks, and stable readings before driving.