Autometer Thermocouple Type K 3/16in Diameter Closed Tip for Digital Stepper Motor Pyrometer

Autometer Thermocouple Type K 3/16in Diameter Closed Tip for Digital Stepper Motor Pyrometer. Confirm the measurement range, diameter, sender or signal requirements, lighting, electrical system, mounting depth, and included components before ordering.

Key Features

• Title:THERMOCOUPLE, TYPE K, 3/16 in. DIA, CLOSED TIP, FOR DIGITAL STEPPER MOTOR PYROMETER.

Fitment

Specifications

What’s Included

One new AutoMeter product identified by manufacturer part number 5251. Senders, adapters, fittings, wiring, mounting hardware, gauges, and companion components are included only when expressly stated for this exact part number.

About AutoMeter

AutoMeter develops performance instrumentation, gauge mounting solutions, sensors, data products, battery equipment, and installation components for street, competition, marine, and professional workshop use.

Related AutoMeter Products

• Autometer Z Series 2-1/16in 4K PSI High Pressure Oil Pump Gauge w/ Digital Stepper Motor
• AutoMeter Gauge Kit 5 Pc. 3-3/8in. & 2-1/16in. Elec Speedo Digital Black Dial W/ Red Led
• Autometer Accessories Thermocouple Type K Sensor 1in Bent W 1/8in Dia.

Browse the AutoMeter collection for additional gauges, mounts, sensors, and accessories.

Frequently Asked Questions

What signal or sender does AutoMeter gauge 5251 require?
The requirement depends on whether this exact gauge is mechanical, electric, digital, GPS, or vehicle-data based. Use only the sender, tubing, harness, adapter, and signal type specified by AutoMeter.

Will AutoMeter 5251 fit my existing gauge mount?
Confirm the stated gauge diameter, case depth, bezel clearance, rear connection clearance, retaining method, and wiring or tubing path before choosing a mount.

Is calibration required for AutoMeter 5251?
Calibration depends on the measurement and signal source. Follow the current AutoMeter instructions for this exact part and verify the reading against known operating data before relying on it.

What must be tested after wiring AutoMeter 5251?
Verify power, ground, illumination, dimming, signal behavior, sender operation, warning functions, and stable readings through the expected operating range.

Installation Instructions

Follow the current AutoMeter instructions for this exact gauge. Verify the signal or sender, pressure or temperature connection, power, ground, fuse, illumination, mounting depth, tubing or wiring protection, calibration, leak checks, and stable readings before driving.