Autometer Ultra-Lite 52mm 0-280 ohm Adj Full Sweep Electronic Fuel Level Programmable Empty-Full Ga

Traditionally, paring the proper fuel level level gauge to the application could be a more difficult task than it needed to be. The AutoMeter Digital Stepper Motor Fuel Level Gauge drastically simplifies the process with its easily configurable resistance range.

Key Features

• Title:2-1/16 in. FUEL LEVEL, PROGRAMMABLE 0-280 O, ULTRA-LITE.

Fitment

Specifications

What’s Included

One new AutoMeter product identified by manufacturer part number 4310. Senders, adapters, fittings, wiring, mounting hardware, gauges, and companion components are included only when expressly stated for this exact part number.

About AutoMeter

AutoMeter develops performance instrumentation, gauge mounting solutions, sensors, data products, battery equipment, and installation components for street, competition, marine, and professional workshop use.

Related AutoMeter Products

• Autometer Ultra-Lite 52mm 0 OHMS Empty/90 OHMS Full Short Sweep Electronic Fuel Level Gauge
• Autometer Ultra-Lite 52mm 73 OHMS Empty/10 OHMS Full Short Sweep Electronic Fuel Level Gauge
• Autometer Phantom 52mm Full Sweep Electronic Fuel Level Programmable Empty-Full Range

Browse the AutoMeter collection for additional gauges, mounts, sensors, and accessories.

Frequently Asked Questions

What signal or sender does AutoMeter gauge 4310 require?
The requirement depends on whether this exact gauge is mechanical, electric, digital, GPS, or vehicle-data based. Use only the sender, tubing, harness, adapter, and signal type specified by AutoMeter.

Will AutoMeter 4310 fit my existing gauge mount?
Confirm the stated gauge diameter, case depth, bezel clearance, rear connection clearance, retaining method, and wiring or tubing path before choosing a mount.

Is calibration required for AutoMeter 4310?
Calibration depends on the measurement and signal source. Follow the current AutoMeter instructions for this exact part and verify the reading against known operating data before relying on it.

What must be tested after wiring AutoMeter 4310?
Verify power, ground, illumination, dimming, signal behavior, sender operation, warning functions, and stable readings through the expected operating range.

Installation Instructions

Follow the current AutoMeter instructions for this exact gauge. Verify the signal or sender, pressure or temperature connection, power, ground, fuse, illumination, mounting depth, tubing or wiring protection, calibration, leak checks, and stable readings before driving.