AWE Tuning 2018-2019 Audi B9 S4 / S5 Quattro 3.0T Cold Front Intercooler Kit

The AWE ColdFront Intercooler for Audi B9 A4 / A5 2.0T & S4 / S5 3.0T is built for the exact application and configuration shown on this page. Match the complete vehicle, product edition, inlet and outlet configuration, tip finish, factory equipment, included components, and every application note before ordering.

Key Features

• By keeping intake air temperature low, and pressure drop at a minimum, engine output remains consistent even when outside temperatures rise.
• Cast aluminum end tanks with internal baffling and a robust bar/plate aluminum core for maximum heat transfer render a 130% increase in frontal surface area and a massive 83% increase in volume over the factory B9 intercooler.
• Presenting the AWE ColdFront Intercooler for the Audi B9 A4/A5 2.0T & S4/S5 3.0T.
• Regardless if your vehicle is producing higher-than-stock boost levels, or youre keeping it within factory spec, the ColdFront Intercooler solves any potential heat-related issues.
• The ColdFront will provide the safety margin needed in order for you to push the limit with confidence.
• There is no cutting required when installing this intercooler.

Fitment

Specifications

What’s Included

One new AWE Tuning product in the exact configuration shown above. Exhaust tips, adapters, hardware, valves, electronics, filters, hoses, and companion parts are included only when identified for manufacturer part number 4510-11060.

About AWE Tuning

AWE designs and manufactures performance exhaust, intake, cooling, and vehicle-specific components with exact application and configuration requirements.

Related Products by Vehicle Fitment

• Brembo 18-23 S4/11-23 S5/14-23 SQ5/15-22 Porsche Macan Rear Premium UV Coated OE Equivalent Rotor
  Shared fitment: 2019 Audi S4 Premium; 20182019 Audi S4 Premium Plus; 20182019 Audi S4 Prestige; 20182019 Audi S5 Premium Plus; 20182019 Audi S5 Prestige; 20182019 Audi S5 Sportback Premium Plus; see product page for additional applications.
• Bilstein B4 OE Replacement 17-19 Audi A4 / 17-18 Allroad / 18-19 S4 Rear DampTronic Shock Absorber
  Shared fitment: 2019 Audi S4 Premium; 20182019 Audi S4 Premium Plus; 20182019 Audi S4 Prestige.
• AWE Tuning Audi B9/B9.5 S4/S5/RS5 3.0T Carbon Fiber AirGate Intake w/ Lid
  Shared fitment: 2019 Audi S4 Premium; 20182019 Audi S4 Premium Plus; 20182019 Audi S4 Prestige; 20182019 Audi S5 Premium Plus; 20182019 Audi S5 Sportback Premium Plus; 20182019 Audi S5 Sportback Prestige.

Compare the listed shared fitment with your exact vehicle. Check engine, chassis, transmission, body style, factory equipment, and any required supporting parts on each product page. Conversion kits and replacement components require the specified existing equipment.

Frequently Asked Questions

Will AWE 4510-11060 fit my 2017-2020 Audi A4?
Match the complete year, make, model, application, factory equipment, dimensions, and every exclusion for this exact part number.

What configuration is included with AWE 4510-11060?
Use the configuration and included-item details on this page. Similar AWE products can use different finishes, sides, hardware, or companion parts.

Can AWE 4510-11060 replace another AWE part number?
Use an alternate only when AWE explicitly identifies it as compatible or superseding. Match every connection, dimension, mounting point, and application requirement.

What should be checked before installation?
Inspect the product, compare the exact part number and vehicle configuration, review the current AWE instructions, and confirm all required tools, hardware, clearances, and emissions requirements.

Installation Instructions

Follow AWE’s current instructions for this exact part number. Test-fit all components, confirm the vehicle and configuration, protect nearby surfaces, use the specified hardware and torque values, check clearances and connections, then inspect for leaks, contact, or abnormal operation before driving.