Baja Designs Squadron 2.0 Lens Kit – Driving/Combo

The Baja Designs 6684032 is a replacement lens kit for the Squadron 2.0 light pod, restoring factory driving/combo beam performance after impact damage, fading, or a beam pattern change without replacing the entire light housing.

Key Features

• Includes a fresh gasket and O-ring for a proper weatherproof reseal.
• Direct fit replacement, no modification to the Squadron 2.0 housing required.
• Driving/Combo beam pattern designed and tested by Baja Designs optical engineers.

Fitment

Specifications

What’s Included

• 1x 6684032 replacement lens
• 1x gasket/O-ring for reseal

About Baja Designs

Baja Designs develops performance lighting for street, off-road, racing, commercial, and powersports applications. Each light, lens, optic, bracket, and harness remains exact-part specific, so verify the complete configuration before installation.

Related Baja Designs Products

• Shop all Baja Designs products
• Baja Designs 10in Rock Guard Light Bar Cover – Amber
• Baja Designs 10in Rock Guard Light Bar Cover – Black
• Baja Designs 660119 S1 Headlight Lens Kit Clear Work Scene Beam

Frequently Asked Questions

Which Baja Designs light will this lens or cover fit?
Match the exact light family, generation, size, optic, color, and mounting interface. Similar-looking Baja Designs housings may use different lenses or covers.

Does replacing the lens change the beam pattern or color?
It can. The optic and lens configuration determine the stated pattern and color, so use only the combination specified for the intended light and application.

Can the lens be serviced without replacing the complete light?
Baja Designs serviceable-light construction permits lens or optic service on supported families. Follow the current procedure and inspect the seal before reassembly.

Installation Instructions

1. Remove the light pod from its mount and set it on a clean, flat surface
2. Remove the retaining screws around the perimeter of the lens
3. Lift off the old lens and gasket, then clean the sealing surface of the housing
4. Install the new 6684032 lens with the fresh gasket, aligning the mounting holes
5. Tighten the retaining screws evenly in a crisscross pattern to seat the gasket fully