Baja Designs Squadron 2.0 Lens Kit – Spot (Factory Amber)

Replace lenses on your Baja Designs Squadron 2.0 Spot lights with this Factory Amber kit. Designed for off-road drivers on Jeep Wrangler and similar vehicles facing dust fog or haze. Amber lenses at 2900K color temperature deliver clear visibility over long distances in tough conditions.

Key Features

• Spot Beam Pattern Focused long-range light up to 500 meters ahead.
• USA Made Crafted with precision for reliable performance.
• Advanced coatings for consistent light output.
• Materials resist cracking fading over years.
• A: Amber scatters less in dust fog than white light for farther reach.

Fitment

Specifications

What’s Included

• 2 x Squadron 2.0 Spot Factory Amber Lenses

About Baja Designs

Baja Designs develops performance lighting for street, off-road, racing, commercial, and powersports applications. Each light, lens, optic, bracket, and harness remains exact-part specific, so verify the complete configuration before installation.

Related Baja Designs Products

• Shop all Baja Designs products
• Baja Designs Squadron 2.0 Lens Kit – Wide Cornering (Baja Amber)
• Baja Designs 10in Rock Guard Light Bar Cover – Amber
• Baja Designs Head Light Lens LP6 Series Spot Lens Kit

Frequently Asked Questions

Which Baja Designs light will this lens or cover fit?
Match the exact light family, generation, size, optic, color, and mounting interface. Similar-looking Baja Designs housings may use different lenses or covers.

Does replacing the lens change the beam pattern or color?
It can. The optic and lens configuration determine the stated pattern and color, so use only the combination specified for the intended light and application.

Can the lens be serviced without replacing the complete light?
Baja Designs serviceable-light construction permits lens or optic service on supported families. Follow the current procedure and inspect the seal before reassembly.

Installation Instructions

1. Disconnect power and allow the light to cool before service.
2. Clean the housing, remove the existing lens or cover without damaging the seal, and install the exact replacement in the documented orientation.
3. Inspect the gasket and fasteners, tighten evenly, restore power, and verify beam pattern, sealing, and normal operation.