Baja Designs Squadron 2.0 Rock Guard (Single) – Baja Amber

The Baja Designs 668015 is a single Baja Amber rock guard for the Squadron 2.0 Sport and Squadron 2.0 Pro LED pods. Machined from hard-coated polycarbonate, the 668015 snaps securely over the front face of the pod to shield the lens from rocks, roost, branches, and trail debris without requiring any tools. When the lights are on, the amber polycarbonate converts the pod’s output to Baja Amber, cutting through dust, fog, rain, and smoke with less glare than white light for improved contrast in low-visibility conditions. This is an accessory sold individually, not a kit.

Key Features

• Hard-coated polycarbonate construction resists impacts and UV degradation.

Fitment

Specifications

What’s Included

• 1 x Baja Designs 668015 Baja Amber Squadron 2.0 Rock Guard

About Baja Designs

Baja Designs develops performance lighting for street, off-road, racing, commercial, and powersports applications. Each light, lens, optic, bracket, and harness remains exact-part specific, so verify the complete configuration before installation.

Related Baja Designs Products

• Shop all Baja Designs products
• Baja Designs 10in Rock Guard Clear OnX6
• Baja Designs 668016 Squadron 2.0 Rock Guard Single Clear
• Baja Designs 668018 Squadron-R 2.0 Rock Guard Single Baja Amber

Frequently Asked Questions

Which Baja Designs light will this lens or cover fit?
Match the exact light family, generation, size, optic, color, and mounting interface. Similar-looking Baja Designs housings may use different lenses or covers.

Does replacing the lens change the beam pattern or color?
It can. The optic and lens configuration determine the stated pattern and color, so use only the combination specified for the intended light and application.

Can the lens be serviced without replacing the complete light?
Baja Designs serviceable-light construction permits lens or optic service on supported families. Follow the current procedure and inspect the seal before reassembly.

Installation Instructions

1. Disconnect power and allow the light to cool before service.
2. Clean the housing, remove the existing lens or cover without damaging the seal, and install the exact replacement in the documented orientation.
3. Inspect the gasket and fasteners, tighten evenly, restore power, and verify beam pattern, sealing, and normal operation.