Baja Designs Squadron-R 2.0 Rock Guard (Single) – Black

This Baja Designs body armor & rock rails is the Squadron-R 2.0 Rock Guard (Single) – Black. Confirm the exact light configuration, beam pattern, lens color, output, mounting method, wiring, included quantity, and vehicle application before ordering.

Fitment

Specifications

What’s Included

• One new Baja Designs lens or protective component in the exact configuration and quantity stated in this listing
• Lights, lenses, brackets, harnesses, switches, relays, covers, and mounting hardware are included only when expressly identified for this exact part

About Baja Designs

Baja Designs develops performance lighting for street, off-road, racing, commercial, and powersports applications. Each light, lens, optic, bracket, and harness remains exact-part specific, so verify the complete configuration before installation.

Related Baja Designs Products

• Shop all Baja Designs products
• Baja Designs 10in Rock Guard Clear OnX6
• Baja Designs 668016 Squadron 2.0 Rock Guard Single Clear
• Baja Designs 668018 Squadron-R 2.0 Rock Guard Single Baja Amber

Frequently Asked Questions

Which Baja Designs light will this lens or cover fit?
Match the exact light family, generation, size, optic, color, and mounting interface. Similar-looking Baja Designs housings may use different lenses or covers.

Does replacing the lens change the beam pattern or color?
It can. The optic and lens configuration determine the stated pattern and color, so use only the combination specified for the intended light and application.

Can the lens be serviced without replacing the complete light?
Baja Designs serviceable-light construction permits lens or optic service on supported families. Follow the current procedure and inspect the seal before reassembly.

Installation Instructions

1. Disconnect power and allow the light to cool before service.
2. Clean the housing, remove the existing lens or cover without damaging the seal, and install the exact replacement in the documented orientation.
3. Inspect the gasket and fasteners, tighten evenly, restore power, and verify beam pattern, sealing, and normal operation.