Bilstein B8 8112 Front Right Coilover for 2003-2009 4Runner, GX470 and FJ Cruiser

Keep Damping Consistent When the Road Gets Rough

Remote-reservoir capacity helps manage heat and maintain suspension control during sustained use. Bilstein 41-326350 is built for 2003-2009 applications from Lexus and Toyota shown in the Fitment table. Key details are Bilstein B8 8112 ZoneControl CR DSA+ and front right.

Key Features

• Bilstein 41-326350: Bilstein B8 8112 ZoneControl CR DSA+
• front right
• 17.43 in collapsed, 22.24 in extended
• 60 mm piston
• 22 mm shaft
• remote reservoir
• 600 lb/in spring
• high/low compression and JCO adjustment

Fitment

Use Bilstein 41-326350 only for the applications below. Confirm every listed qualifier and exclusion.

Specifications

What’s Included

• One assembled front-right coilover for Bilstein 41-326350
• 600 lb/in spring
• Remote reservoir
• Bolt-on reservoir mount
• Not included: Front-left module

About Bilstein

Bilstein builds monotube and twin-tube dampers for OE replacement, street performance, and off-road use, with each series tuned for a defined vehicle or dimensional application.

Related Parts

• Check application-matched mounts, boots, bump stops, springs, and opposite-side dampers separately as the installation requires.

FAQ

What is the 41-326350?

It is a Bilstein adjustable coilover corner module for 2003-2009 applications from Lexus and Toyota shown in the Fitment table, built around Bilstein B8 8112 ZoneControl CR DSA+.

What is the main benefit of this part?

Bilstein B8 8112 ZoneControl CR DSA+; front right.

Which applications does it fit?

It is intended for 2003-2009 applications from Lexus and Toyota shown in the Fitment table. Use the Fitment table and every listed qualifier before ordering.

What comes with this product?

One assembled front-right coilover; 600 lb/in spring; Remote reservoir; Bolt-on reservoir mount.

What construction details should I know?

Adjustable coilover corner module.

What should be checked before installation?

Compare the old and new parts, confirm position and orientation, and verify all application notes, clearances, fasteners, and required companion parts.

How should this part be installed?

Use professional installation. Follow all torque, alignment, bleeding, calibration, or break-in procedures that apply.

What warranty applies?

Limited lifetime warranty shown by authorized retailers.

Installation Instructions

1. Use professional installation.
2. Complete an alignment after installation.
3. Confirm the exact part number, application, included components, and all required tools before disassembly.
4. Inspect mounting points, mating parts, clearances, wiring, fluids, and fasteners before installation.

California Proposition 65 Warning: Store/retailer evidence indicates a Proposition 65 warning is used; manufacturer product page links safety data but does not name a chemical. Preserve a general warning only.