Bilstein B8 TerraSport Rear Shock for 2013-2018 Toyota RAV4

Rear Suspension Control for the 20132018 Toyota RAV4

Bilstein 24-328425 is a B8 TerraSport rear shock for the verified RAV4 applications below. Its monotube design is tuned for this application and supplied with a spring-seat spacer that permits approximately 1 inch of rear lift when installed as directed.

Key Features

• Application-specific B8 TerraSport monotube damping.
• Non-adjustable damping with silver-painted body and protective boot.
• Eye-style upper and lower mounts.
• Optional spring-seat spacer for approximately 1 inch of rear lift with the factory springs.
• 24-328425 is sold individually; two rear shocks are required per vehicle.

Fitment

Confirm the exact vehicle and suspension configuration before ordering 24-328425. Front suspension components are separate. Follow Bilstein’s instructions when retaining stock height or installing the supplied lift spacer; do not assume compatibility with other lift kits.

Specifications

What’s Included

• One Bilstein 24-328425 rear shock with protective boot.
• One spring-seat spacer, related hardware and installation instructions.

Factory coil springs, front struts and a second rear shock are not included.

About Bilstein

Bilstein develops application-specific suspension dampers for road and off-road use. B8 TerraSport products are designed to support CUV suspension upgrades. This shock carries Bilstein’s limited lifetime warranty, subject to the manufacturer’s terms.

Related Parts

• Air Lift 1000 air spring kit for Toyota RAV4 a separate load-support product, not an included component or a verified combination with this suspension upgrade. Confirm spring and spacer compatibility before combining products.

FAQ

What is the 24-328425?

It is an individual Bilstein B8 TerraSport rear shock with supporting spacer and hardware for the listed Toyota RAV4 applications.

Is this a pair of shocks?

No. One shock is supplied; a vehicle requires two for the rear axle.

Does the shock alone raise the vehicle?

The included spring-seat spacer produces the specified approximate 1-inch rear lift when installed according to Bilstein’s instructions.

Can I retain stock rear ride height?

The instructions provide a path that omits the optional lift spacer when retaining stock height. A professional must verify the full suspension configuration.

Are replacement coil springs included?

No. The application uses compatible factory springs; new coil springs are not included.

Can I adjust the damping?

No. The shock has non-adjustable, application-specific damping.

Does this include the front suspension?

No. Front struts and other front suspension parts are separate.

Who should install it?

Bilstein requires installation by a professional automotive suspension technician with the necessary tools and knowledge.

Installation Instructions

1. Verify fitment and review the official Bilstein mounting instructions.
2. Have a professional technician support the vehicle and remove the original rear shocks using the vehicle service procedure.
3. If the optional lift is required, install the spring-seat spacer and refit the factory spring in its original orientation as instructed.
4. Install the shocks, tighten fasteners using the specified service procedure, then check alignment and suspension operation.

California Proposition 65 Warning

WARNING: Cancer & Reproductive Harm – www.P65Warnings.ca.gov