This BorgWarner SuperCore assembly is selected by exact manufacturer part number 179375 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• Forged Milled Compressor Wheel: 67mm inducer 87.7mm exducer Gamma-Ti design flows 58 lb/min for broad efficiency map.
• Dual Ceramic Ball Bearings: Cuts friction for quicker spool-up and extended service life under high boost.
• Gamma Turbine Wheel: 66.1mm inducer 58mm exducer handles 55 lb/min exhaust with durable high-temp coating.
• Engineered in Germany for precise balance and flow characteristics.
• Compressor wheel forged Gamma-Ti turbine wheel Inconel with Gamma blade coating CHRA investment cast stainless steel.
• Super core assembly only compressor and turbine housings required separately for complete turbo.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 179375. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner Super Core EFR B1 6758
• BorgWarner Super Core EFR B1 6258
• BorgWarner Super Core EFR B1 6258

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.

This BorgWarner SuperCore assembly is selected by exact manufacturer part number 11587105001 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• Dual Ceramic Ball Bearings: Reduces friction for spool times under 3000 RPM on 2.0L engines and supports 150000+ miles of service.
• Gamma-Ti Compressor Wheel 67/88mm: Flows up to 56 lb/min with 72% peak efficiency and extended map width for part-throttle response.
• Inconel Turbine Wheel 58/49mm: Survives 1050C EGTs with 71 trim for quick exhaust energy conversion.
• Machined Speed Sensor Port: Enables real-time RPM monitoring for precise tuning and overboost protection.
• Pre-Installed Oil Restrictor: Regulates feed pressure to safeguard bearings during install and operation.
• Requires -4AN oil feed -10AN drain lines with 40-80 PSI regulated pressure.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 11587105001. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner Super Core EFR B1 6758
• BorgWarner Super Core EFR B1 6258
• BorgWarner Super Core EFR B1 6258

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.