BorgWarner Super Core EFR B2 9180

This BorgWarner SuperCore assembly is selected by exact manufacturer part number 179356 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• Compressor Wheel: Forged milled 69.6mm inducer and 91mm exducer design with 80% map width and extended Gamma 1.98 for massive airflow and surge resistance.
• Turbine Wheel: Inconel Gamma-T 80mm inducer and 73.5mm exducer with 84% trim for quick response and endurance under extreme boost.
• Dual Ball Bearing: Ceramic hybrid cartridge provides low friction, high RPM capability over 200000 and long service life.
• Power Rating: Handles 900-1200+ HP in single turbo setups with proven performance in professional racing.
• B2 frame compressor housings in 50mm or 64mm inlet sizes and T3 or T4 turbine housings with.85 to 1.05 A/R options.
• Forged milled aluminum compressor wheels, Inconel turbine wheels and investment cast center housing with nickel plating.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 179356. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner Super Core EFR B1 6258
• BorgWarner Super Core EFR B1 6258
• BorgWarner Super Core EFR B1 6758

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.