BorgWarner SuperCore Assembly SX-E S300SX-E 62mm Inducer 8776

This BorgWarner SuperCore assembly is selected by exact manufacturer part number 13009097006 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• 62mm Billet Compressor Wheel: 62.0mm inducer and 83.0mm exducer with 57 trim delivers 110+ lbs/min flow for quick spool and top end power.
• 80/67.5mm Inconel Turbine Wheel: 80.0mm inducer 67.5mm exducer 71 trim withstands 1400+ degree EGT for extreme endurance.
• Dual Ceramic Ball Bearing Cartridge: Supports 170,000+ RPM with low friction for faster transient response and longer life.
• Factory Balanced Assembly: Precision machined shaft and thrust components ensure vibration-free operation at high boost.
• Designed for performance applications over 800 HP with proper fueling and tuning.
• 2618 billet aluminum compressor wheel, 400+ degree Inconel turbine wheel, and ceramic hybrid ball bearings for heat and speed resistance.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 13009097006. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner SuperCore Assembly SX-E S300SX-E 64mm Inducer 8776
• BorgWarner SuperCore Assembly SX-E S300SX-E 72mm 9180
• BorgWarner SuperCore Assembly SX-E S300SX-E 8376

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.