BorgWarner SuperCore Assembly SX-E S300SX-E 72mm 9180

This BorgWarner SuperCore assembly is selected by exact manufacturer part number 13009095091 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• 80mm Inconel Turbine Wheel: 80mm inducer 74mm exducer forged wheel handles 1600F+ exhaust temps with efficient energy transfer.
• 72mm Billet Compressor Wheel: 72mm inducer 96mm exducer 10-blade extended tip design flows 90+ lb/min for strong mid-range torque and top-end power.
• Dual Ball Bearing CHRA: Journal and thrust bearings reduce friction for 25% faster spool-up and 50K+ mile durability.
• SuperCore Build Flexibility: Bare rotating assembly mates with stock or aftermarket compressor turbine housings for custom turbo setups.
• Machined to micron tolerances for balance and reliability.
• Billet aluminum compressor wheel Inconel turbine wheel 347SS bearing housing for heat resistance.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 13009095091. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner SuperCore Assembly SX-E S300SX-E 9180 (66mm Ind. / 91mm Exd.)
• BorgWarner SuperCore Assembly SX-E S300SX-E 9180 (69mm Ind. / 91mm Exd.)
• BorgWarner SuperCore Assembly SX-E S300SX-E 62mm Inducer 8776

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.