BorgWarner SuperCore Assembly SX-E S300SX-E 8376

This BorgWarner SuperCore assembly is selected by exact manufacturer part number 13009097056 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• 99/84mm Gamma-Ti Turbine Wheel: Resists high exhaust temperatures for sustained power in demanding racing and towing conditions.
• T4 Divided 0.88 A/R Turbine Housing: Balances backpressure and flow for strong mid-range torque in 6.0L+ displacement engines.
• 83/76mm Forged Milled Compressor Wheel: Handles massive intake airflow up to 105 lb/min supporting 1000+HP while maintaining efficiency across broad boost ranges.
• Dual Ball Bearing Cartridge: Reduces friction for faster spool-up and improved throttle response compared to journal bearing designs.
• Ported Anti-Surge Compressor Housing: V-band outlet 4-inch inlet prevents compressor surge at high boost levels over 50psi.
• High-flow components tested for real-world diesel power gains.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 13009097056. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner SuperCore Assembly SX-E S300SX-E 62mm Inducer 8776
• BorgWarner SuperCore Assembly SX-E S300SX-E 64mm Inducer 8776
• BorgWarner SuperCore Assembly SX-E S300SX-E 72mm 9180

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.