BorgWarner SuperCore Assembly SX-E S300SX-E 9180 (69mm Ind. / 91mm Exd.)

This BorgWarner SuperCore assembly is selected by exact manufacturer part number 13009097051 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• Turbine Wheel: 91mm exducer matched to S300SX-E frame provides fast response and high exhaust flow handling.
• Compressor Wheel: 69mm inducer 91mm exducer billet extended-tip design flows 110+ lb/min air for extreme power gains.
• Bearing System: Dual hydrodynamic journal bearings with 360-degree thrust surface support 170000+ RPM operation.
• Construction: Inconel turbine wheel and billet compressor endure high heat and boost levels.
• Engineered for durability in 1000HP+ street and track use.
• Billet aluminum compressor wheel with extended tips and Inconel turbine wheel for heat resistance up to 1050C.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 13009097051. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner SuperCore Assembly SX-E S300SX-E 9180 (66mm Ind. / 91mm Exd.)
• BorgWarner SuperCore Assembly SX-E S300SX-E 72mm 9180
• BorgWarner SuperCore Assembly SX-E S300SX-E 62mm Inducer 8776

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.