BorgWarner SuperCore Assembly SX-E S400SX-E 72mm 96/87

This BorgWarner SuperCore assembly is selected by exact manufacturer part number 14009097006 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• 72mm Compressor Wheel: Billet aluminum 72mm inducer 99mm exducer wheel moves 110+ lbs/min of air for dyno-proven power gains.
• 96/87mm Turbine Wheel: Inconel 96mm inducer 87mm exducer wheel handles EGTs over 1600F with efficient exhaust flow.
• Dual Ball Bearing CHRA: Ceramic ball bearings reduce friction for quicker spool-up and withstand 150000+ RPM operation.
• S400SX-E Frame Compatible: Direct fit into BorgWarner S400SX-E housings for custom turbo builds in trucks and racing.
• Lightweight Design: Precision balanced assembly weighs 26.5 lbs for responsive throttle and reduced drivetrain stress.
• Every assembly factory balanced to 120000 RPM for vibration-free operation.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 14009097006. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner SuperCore Assembly SX-E S400SX-E 76mm 100/87
• BorgWarner SuperCore Assembly SX-E S400SX-E 76mm 100/96
• BorgWarner SuperCore Assembly SX-E S400SX-E 80mm 110/96

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.