BorgWarner SuperCore Assembly SX-E S400SX-E 76mm 100/87

This BorgWarner SuperCore assembly is selected by exact manufacturer part number 14009097014 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• High HP Capacity: Rated for 1150 HP maximum in properly matched housings for demanding diesel builds.
• 76mm Billet Compressor Wheel: 76.8mm inducer 100mm exducer 14-blade design flows 110+ lbs/min air for massive power gains.
• 99/87mm Turbine Wheel: 99mm inducer 87mm exducer 13-blade inconel construction supports high exhaust volumes with low backpressure.
• Extended Tip Technology: Improves surge resistance and broadens efficiency map for street and track use.
• Compressor wheel is billet 2618 aluminum turbine wheel is Inconel 713C for heat resistance up to 1050C.
• SuperCore only requires separate S400SX-E compressor and turbine housings to complete turbo.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 14009097014. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner SuperCore Assembly SX-E S400SX-E 76mm 100/96
• BorgWarner SuperCore Assembly SX-E S400SX-E 72mm 96/87
• BorgWarner SuperCore Assembly SX-E S400SX-E 80mm 110/96

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.