BorgWarner SuperCore Assembly SX-E S400SX-E 80mm 110/96

This BorgWarner SuperCore assembly is selected by exact manufacturer part number 14009097010 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• Dual Ceramic Ball Bearing Cartridge: Cuts friction by 60% enables 15000 RPM/s acceleration for instant throttle response.
• 80mm Billet Compressor Wheel: 80.35mm inducer 110.5mm exducer 60 trim design flows 110+ lbs/min for dyno-crushing boost.
• 96mm Inconel Turbine Wheel: 99.65mm inducer 96.55mm exducer 88 trim withstands 1600+ degrees F for reliability under extreme power.
• Pre-Balanced Assembly: Factory VSR balanced to 120000 RPM supports drop-in core swaps with zero vibration.
• Investment Cast Center Housing: Oil-cooled journal backup with water ports prevents coking in long-haul diesel duty.
• Precision CNC machined in USA with aerospace tolerances.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 14009097010. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner SuperCore Assembly SX-E S400SX-E 88mm 110/96
• BorgWarner SuperCore Assembly SX-E S400SX-E 72mm 96/87
• BorgWarner SuperCore Assembly SX-E S400SX-E 76mm 100/96

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.