BorgWarner SuperCore Assembly SX-E S400SX-E 88mm 110/96

This BorgWarner SuperCore assembly is selected by exact manufacturer part number 14009097008 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• 96mm Inconel Turbine Wheel: Heat-resistant alloy handles 1600+ degrees F EGTs with 110mm inducer for low-backpressure exhaust flow.
• 88mm Billet Compressor Wheel: Extended-tip design flows 140+ lbs/min for rapid boost response and top-end power in 1000HP+ setups.
• Dual Ball Bearing CHRA: Low-friction ceramic-hybrid bearings reduce spool time by 25% over journal designs and support 200K+ RPM.
• Prime oil system and restrict oil feed to 80psi max during break-in.
• Inconel 713C turbine wheel and 2618 billet aluminum compressor wheel resist creep and fatigue at extreme boost levels.
• Super core requires separate compressor cover and turbine housing for complete turbo assembly.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 14009097008. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner SuperCore Assembly SX-E S400SX-E 80mm 110/96
• BorgWarner SuperCore Assembly SX-E S400SX-E 72mm 96/87
• BorgWarner SuperCore Assembly SX-E S400SX-E 76mm 100/96

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner SuperCore assembly a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.