BorgWarner Turbo EFR B2 8374 0.83 a/r VO WG

This BorgWarner turbocharger is selected by exact manufacturer part number 179258 and complete turbo-system specifications. Confirm every wheel, housing, flange, A/R, connection, orientation, and wastegate requirement before ordering.

Key Features

• Dual Ceramic Ball Bearings: Supports over 200000 RPM for minimal friction and rapid spool under 3000 RPM.
• Forged Milled Compressor Wheel: 57.4mm inducer 74mm exducer flows 57 lb/min for efficient airflow in 250-450HP range.
• Gamma-Ti Turbine Wheel: 60mm inducer 55mm exducer resists heat for sustained high-RPM performance.
• T3 divided manifold flange required for direct bolt-on.
• Precision Swiss manufacturing for consistent fit and flow.
• Direct OEM technology from global racing supplier.

Fitment

Specifications

What’s Included

One new BorgWarner product in the exact configuration identified by manufacturer part number 179258. Gaskets, lines, clamps, housings, actuators, sensors, hardware, and companion components are included only when expressly stated for this part number.

About BorgWarner

BorgWarner develops original-equipment and performance turbocharging systems, including EFR, AirWerks, S-Series, K-Series, SuperCore assemblies, housings, cartridges, actuators, and service components.

Related BorgWarner Products

• BorgWarner Turbo EFR B2 7670 0.83 a/r VO WG
• BorgWarner Turbo EFR B2 8374 0.92 a/r VTF WG
• BorgWarner Turbo EFR B1 6258 0.64 a/r VO WG

Browse the BorgWarner collection for related turbochargers, housings, assemblies, actuators, and service components.

Frequently Asked Questions

How do I confirm this BorgWarner part matches my turbo system?
Match the exact BorgWarner part number, turbo family, compressor and turbine wheel sizes, housing A/R, flange, inlet and outlet geometry, bearing housing, wastegate configuration, and every connection before ordering.

Is this BorgWarner turbocharger a direct replacement?
Only when the exact part number, dimensions, housings, flanges, rotation, wastegate configuration, oil and coolant connections, and vehicle or system application all match. Similar turbo families are not automatically interchangeable.

What supporting parts should be inspected during installation?
Inspect or replace the oil feed and drain, coolant lines, gaskets, fasteners, intake and charge piping, intercooler, exhaust connections, wastegate hardware, and filtration components. Correct the cause of the previous turbo failure before startup.

Installation Instructions

Follow BorgWarner’s current instructions and the vehicle or system service information for this exact part number. Verify every interface before disassembly, correct the cause of any prior turbo failure, prime the oil system, keep debris out of all passages, use new required seals and fasteners, confirm free rotation and line routing, and check for leaks before load. Professional turbo-system installation and calibration are recommended.