The COBB Subaru SF Intake System Hardware Kit does not have enough exact application evidence to assign safe vehicle YMM. Match manufacturer part number 715100-HW, complete vehicle, engine and transmission configuration, factory equipment, required calibration, emissions eligibility, interfaces, and every product note before ordering.

Key Features

• High-Temperature Silicone Couplers: Flexible 3-inch diameter couplers handle boost pressures up to 30 PSI while sealing tightly to the turbo inlet.
• Laser-Cut Aluminum Bracket: Provides exact alignment and vibration-resistant mounting for long-term stability under hood heat and pressure.
• Stainless Steel Clamps: Rust-proof worm-gear clamps deliver even pressure for airtight fits that withstand track abuse and daily driving.
• Complete Bolt Kit: Includes M6 stainless bolts, washers, and nuts torqued to Subaru specs for hassle-free assembly.
• Direct-Fit Design: Engineered for EJ20, EJ25, and FA20 engines, bolts directly without fabrication or modifications.
• 6061-T6 aluminum bracket, 4-ply reinforced silicone couplers rated to 350F, and 304 stainless steel clamps and fasteners.

Fitment

Specifications

What’s Included

One new COBB product in the exact configuration and quantity identified by manufacturer part number 715100-HW. Calibrations, hardware, hoses, clamps, gaskets, adapters, wiring, fluids, tools, and companion components are included only when expressly stated for this exact part number.

About COBB

COBB develops engine-management, intake, cooling, exhaust, drivetrain, suspension, and vehicle-accessory products for supported performance platforms. Correct selection remains exact-vehicle, exact-configuration, exact-interface, and exact-part-number specific.

Related COBB Products

• Cobb Subaru Big SF Intake System Hardware Kit (for 745110)
• Cobb Subaru SF Intake System Hardware Kit
• COBB 15-21 Subaru WRX Big SF Intake System Airbox Bracket Kit (for 745110)

Browse the COBB collection for related tuning, intake, cooling, exhaust, drivetrain, and chassis products.

Frequently Asked Questions

Why is fitment verification required for this COBB product?
Exact vehicle application evidence is not complete enough for safe YMM. Confirm the vehicle, drivetrain, factory equipment, calibration, emissions eligibility, interfaces, and exact part number before ordering.

Are all supporting parts included?
Only components expressly listed for the exact manufacturer part number are included. Tuning, hardware, hoses, clamps, gaskets, adapters, wiring, fluids, and companion components may be separate.

Is tuning or calibration required after installation?
Requirements depend on the exact product and vehicle. Intake, fuel, boost, turbo, and engine-management changes may require a compatible calibration before operation.

Installation Instructions

Follow the current COBB and factory service instructions for this exact part number. Verify fitment, factory equipment, emissions eligibility, required calibration, software and firmware, interfaces, hardware, fluid or electrical connections, and clearances before installation. Inspect the completed work and confirm safe operation before full-load use.

Cobb Subaru SF Intake System Hardware Kit is the exact COBB component identified by manufacturer part number 712150-HW for the configuration shown in this listing. Confirm the exact manufacturer part number and all current specifications before ordering.

Fitment

Select this component by exact part number, dimensions, engine or system architecture, and mating components. No broad year-make-model claim is used where the manufacturer does not publish one.

Specifications

What’s Included

One new COBB air intake system identified by manufacturer part number 712150-HW in the configuration shown. Hardware or companion parts are included only when expressly stated by the manufacturer.

About COBB

COBB manufactures automotive performance and replacement parts identified by exact part number, specifications, and published application data.

Related COBB Products

• Shop all COBB products
• Cobb 13-18 Ford Focus ST / 16-18 Focus RS Shifter Cable Bracket Bushings
• Cobb 97-01 Subaru Impreza RS/TS 5-speed Double Adjustable Shifter
• Cobb 04-05 Subaru Forester XT 5 speed Double Adjustable Short Shifter

Frequently Asked Questions

How do I confirm 712150-HW is correct?
Select this component by exact part number, dimensions, engine or system architecture, and mating components. No broad year-make-model claim is used where the manufacturer does not publish one.

Are similar-looking parts interchangeable?
No. Match part number 712150-HW, dimensions, configuration, included components, and every current manufacturer note.

What is included with this listing?
One new COBB air intake system identified by manufacturer part number 712150-HW in the configuration shown. Hardware or companion parts are included only when expressly stated by the manufacturer.

Installation

Follow the current COBB instructions for part number 712150-HW. Verify fit, clearance, system specifications, fastener torque, and safe operation before use. Professional installation is recommended when specialized tools, alignment, calibration, or fabrication are required.

The COBB Subaru SF Intake System Hardware Kit does not have enough exact application evidence to assign safe vehicle YMM. Match manufacturer part number 712100-HW, complete vehicle, engine and transmission configuration, factory equipment, required calibration, emissions eligibility, interfaces, and every product note before ordering.

Key Features

• Silicone Couplers: Two 2.75″ to 3″ 45-degree silicone couplers resist heat and pressure for durable, flexible connections between intake pipe and turbo inlet.
• T-Bolt Clamps: Two 2.75″-3″ and one 3″ stainless steel T-bolt clamps provide maximum clamping force to prevent boost leaks under high performance demands.
• Worm Gear Clamps: Two 3.5″ stainless steel worm gear clamps secure the MAF sensor housing and filter for vibration-resistant fit.
• Direct Compatibility: Engineered exclusively for Cobb SF Intake Systems, matching OEM routing for seamless integration on Subaru EJ and FA turbo engines.
• Compatible with stock hardware locations torque clamps to 6-8 Nm to avoid over-tightening.
• Components use premium materials like 4-ply reinforced silicone and 304 stainless steel.

Fitment

Specifications

What’s Included

One new COBB product in the exact configuration and quantity identified by manufacturer part number 712100-HW. Calibrations, hardware, hoses, clamps, gaskets, adapters, wiring, fluids, tools, and companion components are included only when expressly stated for this exact part number.

About COBB

COBB develops engine-management, intake, cooling, exhaust, drivetrain, suspension, and vehicle-accessory products for supported performance platforms. Correct selection remains exact-vehicle, exact-configuration, exact-interface, and exact-part-number specific.

Related COBB Products

• Cobb Subaru Big SF Intake System Hardware Kit (for 745110)
• Cobb Subaru SF Intake System Hardware Kit
• COBB 15-21 Subaru WRX Big SF Intake System Airbox Bracket Kit (for 745110)

Browse the COBB collection for related tuning, intake, cooling, exhaust, drivetrain, and chassis products.

Frequently Asked Questions

Why is fitment verification required for this COBB product?
Exact vehicle application evidence is not complete enough for safe YMM. Confirm the vehicle, drivetrain, factory equipment, calibration, emissions eligibility, interfaces, and exact part number before ordering.

Are all supporting parts included?
Only components expressly listed for the exact manufacturer part number are included. Tuning, hardware, hoses, clamps, gaskets, adapters, wiring, fluids, and companion components may be separate.

Is tuning or calibration required after installation?
Requirements depend on the exact product and vehicle. Intake, fuel, boost, turbo, and engine-management changes may require a compatible calibration before operation.

Installation Instructions

Follow the current COBB and factory service instructions for this exact part number. Verify fitment, factory equipment, emissions eligibility, required calibration, software and firmware, interfaces, hardware, fluid or electrical connections, and clearances before installation. Inspect the completed work and confirm safe operation before full-load use.