Cometic VW / Audi 1800/2000cc 83mm .060 inch MLS Head Gasket

The Cometic VW / Audi 1800/2000cc 83mm .060 inch MLS Head Gasket is intended for the verified vehicle applications listed below. Match manufacturer part number C4247-060, exact engine family, bore, thickness, material, sealing surfaces, fasteners, and every product note before ordering.

Key Features

• Compressed Thickness (in.): 0.060 in.
• Gasket Material: Multi-layer stainless steel.
• Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area.
• This creates an exceptional seal by requiring less clamp loadresulting in less bore distortion.
• The stainless steel outer layers utilize FKM (Viton) rubber coating, a high-temperature and chemical-resistant polymer.
• MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic’s MLS head gaskets, no sealants or re-torque is required.

Fitment

Specifications

What’s Included

One new Cometic gasket product in the exact configuration and quantity identified by manufacturer part number C4247-060. Fasteners, sealants, fluids, companion gaskets, tools, and related engine components are included only when expressly stated for this exact part number.

About Cometic Gasket

Cometic develops sealing products for automotive and powersports engine applications. Correct selection remains exact-engine, exact-dimension, exact-material, exact-interface, and exact-part-number specific.

Related Cometic Gasket Products

• Cometic VW / Audi 1800/2000cc 85mm .060 inch MLS Head Gasket
• Cometic 2012+ VW/Audi 2.0L 83mm .040 inch MLS Head Gasket
• Cometic 96-07 Dodge Viper 4.060 inch Bore .045 inch MLS Head Gasket

Browse the Cometic Gasket collection for related head, intake, exhaust, valve-cover, and engine gasket products.

Frequently Asked Questions

Will this Cometic gasket fit my 1984-1989 Volkswagen Jetta Base?
That application is listed, but confirm the exact engine, bore, gasket thickness, material, sealing-surface requirements, and manufacturer part number before ordering.

Can I choose gasket thickness by vehicle alone?
No. Confirm the exact engine build, bore, deck and head condition, installed clearances, compression target, and manufacturer instructions before selecting thickness.

Do the sealing surfaces need preparation?
Yes. Follow the current Cometic and engine-builder requirements for surface finish, flatness, cleanliness, fasteners, torque procedure, and any specified sealant.

Installation Instructions

Follow the current Cometic and engine-manufacturer instructions for this exact part number. Verify surface finish, flatness, cleanliness, orientation, fasteners, torque sequence, torque values, sealant requirements, clearances, and fluid procedures before assembly. Inspect and test the completed repair before full-load operation.