COMP Cams Cam Gear Set 4.6L/5.4L S/Dohc

The COMP Cams Cam Gear Set 4.6L/5.4L S/Dohc does not have enough exact application evidence to assign safe vehicle YMM. Match manufacturer part number 10254, exact engine, cylinder head, valvetrain, dimensions, supporting components, clearances, and every product note before ordering.

Key Features

• Meanwhile, a perfect cam sensor signal is trigger-tested to over 10,000 RPM and is compatible with any OEM or aftermarket engine control system.
• An all-new Allen wrench adjustment design allows for precise adjustment (+/- 6 degrees) to advance and retard on each bank.

Fitment

Specifications

What’s Included

One new COMP Cams product in the exact configuration and quantity identified by manufacturer part number 10254. Springs, retainers, locks, pushrods, lifters, rockers, timing components, fasteners, lubricants, tools, and calibration are included only when expressly stated for this exact part number.

About COMP Cams

COMP Cams develops camshafts, valvetrain components, timing products, and engine-building tools for performance applications. Correct selection remains exact-engine, exact-valvetrain, exact-interface, and exact-part-number specific.

Related COMP Cams Products

• COMP Cams 96-04 Ford Modular 4.6L-5.4L SOC Performance Lash Adjusters – Set of 16
• COMP Cams 06+ Dodge Hemi 5.7/6.4 V8 VVT Master Cam Kit
• COMP Cams 09+ Dodge 5.7L / 6.4L HEMI w/ VVT Max Power Hydraulic Roller Cam Kit

Browse the COMP Cams collection for related camshafts, springs, retainers, lifters, rockers, timing components, and engine tools.

Frequently Asked Questions

Why is fitment verification required for this COMP Cams product?
Vehicle YMM alone does not identify the required engine and valvetrain configuration. Confirm the exact engine, cylinder head, valvetrain, dimensions, and part number.

Are valve springs or other supporting parts required?
Requirements depend on the exact camshaft and engine combination. Verify springs, retainers, locks, pushrods, lifters, rockers, timing components, clearances, and calibration before assembly.

Does installation require engine measurements?
Yes for most internal valvetrain work. A qualified builder should verify piston-to-valve clearance, spring pressure and travel, coil bind, retainer clearance, geometry, lash or preload, and cam timing.

Installation Instructions

Follow the current COMP Cams and engine-manufacturer instructions for this exact part number. Verify clearances, spring pressure and travel, geometry, lash or preload, fasteners, lubrication, cam timing, break-in, and calibration requirements before assembly. Inspect and test the completed installation before full-load operation.