This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1998-2003 Chevrolet Tracker. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60793, the Air Lift 1000 Air Spring Kit, fit my 1998-2003 Chevrolet Tracker?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60793, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2005-2006 Nissan Armada. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60807, the Air Lift 1000 Air Spring Kit, fit my 2005-2006 Nissan Armada?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60807, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1999-2004 Jeep Grand Cherokee. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60754, the Air Lift 1000 Air Spring Kit, fit my 1999-2004 Jeep Grand Cherokee?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60754, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2011-2021 Toyota Sequoia. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air Lift Drag Bag kits are used to pre-load coil spring suspensions for drag racing.
• They tune the suspension for top performance, improve your hole shot, and lower E.T.s.
• Air Lift Drag Bags help solve the torque vs. traction equalization issue for drag racers.
• Pre-loading the suspension with a set of Drag Bags will even up the loads on the two rear wheels to achieve maximum potential thruse under full torque, in low gear.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60826, the Air Lift 1000 Air Spring Kit, fit my 2011-2021 Toyota Sequoia?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60826, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1996-1997 Lexus LX450. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60728, the Air Lift 1000 Air Spring Kit, fit my 1996-1997 Lexus LX450?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60728, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1997-2000 Chevrolet Venture. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60748, the Air Lift 1000 Air Spring Kit, fit my 1997-2000 Chevrolet Venture?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60748, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1990-1995 Toyota 4Runner. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60812, the Air Lift 1000 Air Spring Kit, fit my 1990-1995 Toyota 4Runner?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60812, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2005-2013 Acura MDX. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60815, the Air Lift 1000 Air Spring Kit, fit my 2005-2013 Acura MDX?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60815, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1984-1991 Jeep Cherokee. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 80702, the Air Lift 1000 Air Spring Kit, fit my 1984-1991 Jeep Cherokee?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 80702, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1982-1996 Buick Century. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60797, the Air Lift 1000 Air Spring Kit, fit my 1982-1996 Buick Century?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60797, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2009-2010 Dodge Ram 1500. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• The air springs are adjustable from 5-35 PSI, ensuring that your vehicle can be ready for any weight and any situation (Note: Do not exceed vehicle’s gross vehicle weight rating (GVWR)).
• Offering up to 1,000 pounds of load-leveling capacity, Air Lift’s flagship kit, the Air Lift 1000, will make towing and hauling with your Dodge/RAM 1500 a comfortable and stress-free experience.
• For frequent use, our fully-adjustable, industry leading air springs are the perfect partner for your vehicle, eliminating any issues that you might face.
• With the added stability and weight-distribution that air springs provide, you can haul safely, knowing that you have optimal braking and steering control.
• Installing the kit is a simple process, requiring only common hand tools and no frame drilling, specifically designed to be installed in 2 hours or less.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60818, the Air Lift 1000 Air Spring Kit, fit my 2009-2010 Dodge Ram 1500?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60818, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.