This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2011 Jeep Wrangler. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60817, the Air Lift 1000 Air Spring Kit, fit my 2011 Jeep Wrangler?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60817, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1996-2001 Toyota 4Runner. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60743, the Air Lift 1000 Air Spring Kit, fit my 1996-2001 Toyota 4Runner?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60743, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2003-2011 Toyota 4Runner. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60809, the Air Lift 1000 Air Spring Kit, fit my 2003-2011 Toyota 4Runner?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60809, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2002-2010 Cadillac Escalade. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60769, the Air Lift 1000 Air Spring Kit, fit my 2002-2010 Cadillac Escalade?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60769, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1973-1977 Buick Century. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Up to 1,000 lbs. of load-leveling capacity*.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60733, the Air Lift 1000 Air Spring Kit, fit my 1973-1977 Buick Century?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60733, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2011-2013 Toyota Sienna. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60732, the Air Lift 1000 Air Spring Kit, fit my 2011-2013 Toyota Sienna?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60732, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2005-2018 Toyota Sequoia. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60786, the Air Lift 1000 Air Spring Kit, fit my 2005-2018 Toyota Sequoia?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60786, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1997-2003 Infiniti QX4. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60742, the Air Lift 1000 Air Spring Kit, fit my 1997-2003 Infiniti QX4?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60742, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2005-2012 Nissan Pathfinder. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Up to 1,000 lbs of adjustable leveling capacity per side.
• Adjustable air pressure from 5 to 35 PSI for variable load leveling.
• Inflate both sides to 5 PSI unladen as a starting baseline, then adjust pressure as needed for load or towing conditions (5-35 PSI range).
• Heavy-duty molded polyurethane construction resists heat, UV, and abrasion.
• Air Lift ALF60810 Air Lift 1000 rear air spring kit for 2005-2012 Nissan Pathfinder.
• Installs inside the OEM rear coil spring, no drilling or cutting required.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60810, the Air Lift 1000 Air Spring Kit, fit my 2005-2012 Nissan Pathfinder?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60810, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2011-2019 Ford Explorer. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60821, the Air Lift 1000 Air Spring Kit, fit my 2011-2019 Ford Explorer?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60821, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 1997-2002 Ford Expedition. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 61792, the Air Lift 1000 Air Spring Kit, fit my 1997-2002 Ford Expedition?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 61792, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2006 Jeep Commander. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60811, the Air Lift 1000 Air Spring Kit, fit my 2006 Jeep Commander?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60811, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.

This Air Lift load-support system is the Air Lift 1000 Air Spring Kit for 2014 Chrysler Town & Country. It supplements the factory suspension to help level the vehicle under an approved load; it does not increase the vehicle manufacturer’s payload or towing rating. Confirm drivetrain, body configuration, hitch and frame clearance, factory suspension, kit capacity, minimum pressure, and every listed exclusion.

Key Features

• Air adjustable with quick connecting, easy-to-use air fittings, Air Lift 1000 air helper springs have a typical max pressure of 35 PSI on cars and SUVs, and 90 PSI on motorhomes.
• They also have up to 1000 pounds of leveling capacity, right up to the manufacturer’s recommended Gross Vehicle Weight Rating.
• and improve ride and handling for full-size vans and trucks with front coil springs.

Fitment

Specifications

What’s Included

One new Air Lift air suspension kit in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.

About Air Lift

Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.

Important Disclosures

California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.

Related Parts

• Air Lift Loadlifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit
• Air Lift Loadlifter 5000 for Half Ton Vehicles
• Shop the complete Air Lift collection

Frequently Asked Questions

Will Air Lift 60814, the Air Lift 1000 Air Spring Kit, fit my 2014 Chrysler Town & Country?
Match year, make, model, drivetrain, bed or wheelbase, hitch hardware, factory suspension, frame brackets, and every application note for this exact kit.

Do Air Lift helper springs increase towing or payload capacity?
No. They help level and support the existing suspension, but the vehicle manufacturer’s GVWR, GAWR, payload, hitch, tire, and towing limits remain unchanged.

Do I need an onboard compressor for this kit?
Manual inflation works for occasional load changes. An onboard compressor is useful for frequent towing or varying loads, but it must match the kit’s pressure and control requirements.

How much air pressure should I use?
Stay within the exact kit’s published minimum and maximum. Add only enough pressure to level the loaded vehicle while keeping axle, tire, payload, and towing limits unchanged.

Installation Instructions

1. Confirm Air Lift part number 60814, the complete application, and every required supporting component before disassembly.
2. Secure the vehicle at the manufacturer’s specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
3. Follow Air Lift’s current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
4. Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
5. Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.