ARB OME 2024+ Toyota Tacoma Front Left Coilover

Restore controlled wheel movement and dependable four-wheel-drive response with this application-specific Old Man Emu damper. Old Man Emu brings racing technology to every day adventures: BP-51 (Bypass 51mm diameter bore) shock absorbers feature revolutionary, patent pending technology developed to deliver unparalleled on and off road performance. Developed and extensively tested under the harshest conditions in Australia, these big bore, position sensitive bypass shock absorbers Confirm the complete vehicle, load, position, paired components, and current ARB instructions before ordering.

Key Features

• 51mm Bore Position-Sensitive Bypass: Provides progressive damping that increases in high-speed zones for maximum control during aggressive off-road use while maintaining compliance on street.
• Remote Reservoir: Increases oil volume and surface area for consistent performance under heat and extended travel preventing fade on long runs or rough terrain.
• Adjustable Damping: Wide range of rebound and compression adjustments via external knobs enable on-vehicle tuning without disassembly to suit specific conditions vehicle setup or preferences.
• 6061 T6 Aluminum Construction: Hard anodized Type 3 40 micron finish on body shaft and reservoir offers corrosion resistance stone chip protection and superior heat dissipation.
• In-House Manufacturing: Fully designed tested and built by ARB Old Man Emu engineers using precision machinery for consistent quality and direct bolt-on fit without modifications.
• Ships as single front left unit weight 16.5 lbs in box measuring 28 x 8 x 7 inches.

Fitment

Specifications

What’s Included

One new Old Man Emu coilovers package identified by manufacturer part number BP5190028L. Springs, dampers, bushings, mounts, liners, fasteners, and fitting hardware are included only when expressly listed for this exact part number.

About Old Man Emu

Old Man Emu is ARB’s suspension division, developing integrated springs, dampers, and hardware for four-wheel-drive control, load support, and durability. Every rate, position, load range, and vehicle application remains part-number specific.

Related Old Man Emu Products

• Shop all Old Man Emu suspension products
• ARB OME 2024+ Toyota Tacoma Front Right Coilover
• ARB Old Man Emu BP-51 Bypass Coilover Kit – Toyota / Lexus
• ARB / OME Nitrocharger Plus Shock 8/83-97 Toyota Hilux

Frequently Asked Questions

How do I confirm Old Man Emu BP5190028L is correct for my vehicle?
Match the listed year, make, and model where published, then confirm drivetrain, axle position, body style, constant accessory load, intended ride height, and every current ARB application note.

Should these dampers be replaced in pairs?
Replace dampers by axle unless ARB expressly specifies otherwise, then inspect the springs, mounts, bushings, bump stops, brake hoses, and alignment.

Will installing these dampers change ride height?
A damper alone does not establish the final ride height. Springs, load, mounting position, trim, suspension geometry, and the complete Old Man Emu setup determine the result.

Installation Instructions

Follow the current ARB instructions and vehicle service information for Old Man Emu part number BP5190028L. Safely support the vehicle, record ride height, use the specified spring-handling and torque procedures, preserve brake, sensor, and tire clearance, verify full suspension travel, then complete the required alignment and fastener rechecks before normal driving.