This ARP performance fastener, stud, bolt, tool, or assembly is the Cylinder Head Stud Kit for Ford 4.6L & 5.4L 3V ARP2000. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.

Key Features

• ARP2000 Alloy: Forged from proprietary material heat-treated to 220000 PSI tensile strength and 190000 PSI for 8740 variants providing fatigue resistance under extreme loads.
• Precision Heat Treatment: Vertically racked studs ensure uniform 220000 PSI strength throughout far exceeding basket-treated competitors.
• Post-Heat-Treat Thread Rolling: Increases fatigue strength 2000% over pre-heat-treat threading for long-term durability.
• Yes ARP 256-4002 fits all 2005-2010 Mustang 4.6L 3V V8 models including GT Bullitt and base V8.
• ARP2000 is a proprietary chrome-moly alloy heat-treated to 220000 PSI tensile strength with superior fatigue properties over standard 8740.
• Black oxide finish resists corrosion.

Fitment

Specifications

What’s Included

One new ARP head stud & bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.

About ARP

Automotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.

Important Disclosures

• California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.

Related Parts

• Shop all ARP products
• ARP 01-10 6.6L GM Duramax Diesel Head Stud Kit
• ARP 02-06 Mini Cooper Head Bolt Kit
• ARP 02-06 Mini Cooper S Head Stud Kit

Frequently Asked Questions

How do I confirm the Cylinder Head Stud Kit for Ford 4.6L & 5.4L 3V ARP2000 fits my application?
Match the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.

Can I reuse the factory torque value with this ARP hardware?
Not automatically. Use ARP’s current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.

What is included with this ARP kit?
Only the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.

Installation Instructions

1. Confirm ARP part number 256-4002, the complete application, and every required supporting component before beginning work.
2. Clean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.
3. Follow ARP’s current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.
4. Verify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.

This ARP performance fastener, stud, bolt, tool, or assembly is the Cylinder Head Stud Kit for Ford 4.6L & 5.4L 3V ARP2000. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.

Key Features

• ARP2000 Alloy: Heat-treated to 220000 PSI tensile strength far exceeding standard steels for dependable head retention.
• Post-Heat Thread Rolling: Increases fatigue resistance 2000 percent compared to pre-heat threading common in other kits.
• Black Oxide Finish: Provides corrosion protection while maintaining precise tolerances throughout service life.
• Kit includes complete set for both cylinder heads.
• Proprietary alloy heat-treated to 220000 PSI with thread rolling after treatment for unmatched fatigue resistance in high-stress applications.
• Made in USA with premium materials throughout.

Fitment

Specifications

What’s Included

One new ARP head stud & bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.

About ARP

Automotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.

Important Disclosures

• California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.

Related Parts

• Shop all ARP products
• ARP 01-10 6.6L GM Duramax Diesel Head Stud Kit
• ARP 02-06 Mini Cooper Head Bolt Kit
• ARP 02-06 Mini Cooper S Head Stud Kit

Frequently Asked Questions

How do I confirm the Cylinder Head Stud Kit for Ford 4.6L & 5.4L 3V ARP2000 fits my application?
Match the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.

Can I reuse the factory torque value with this ARP hardware?
Not automatically. Use ARP’s current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.

What is included with this ARP kit?
Only the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.

Installation Instructions

1. Confirm ARP part number 256-4202, the complete application, and every required supporting component before beginning work.
2. Clean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.
3. Follow ARP’s current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.
4. Verify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.